Step 1. Unpacking The Storageloader - Tandberg Data StorageLoader Quick Installation Manual

Tandberg Data
Front Panel of the StorageLoader
Magazine LED
front bezel indicators

Step 1. Unpacking the StorageLoader

Carefully unpack the unit from the shipping container. Save the container and
packing materials in case you need to transport the StorageLoader in the future. The
packaging is specifically designed for the loader to ensure it is not damaged during
transportation.
Review the contents of the shipping container to be sure that all parts were included
in the shipment. A standard package for the StorageLoader consists of the following
items:
• A factory-assembled StorageLoader unit containing two cartridge
magazines.
• A Standard Accessory Kit containing:
- 1 The Tandberg Data StorageLoader CD containing all manuals
- 1 Printed copy of the Quick Installation Guide
- 1 Warranty/Registration Card
- Rack Mount Hardware Kit
- 2 Line Power Cords: one for USA/Japan and one for European
power outlets
- 1 VHDCI SCSI Interface Cable
- 1 68-pin VHDCI LVD/SE SCSI Terminator.
- 1 Ethernet cable
- Tool for Emergency Magazine Release
- 30 StorageLoader specific Bar code labels
StorageLoader Quick Installation Guide
Standby LCD
switch display
Figure 1. The StorageLoader's front side
Control Magazine
buttons front bezel
StorageLoader
5