Telstra 877W User Manual page 9

confiGurinG your router usinG sdM
the following dialogue box will appear:
5. s elect appropriate boxes for trusted and untrusted
interfaces – as shown above.
Please note: the above WAn interface is provided as
an example for ethernet set up (ie FastEthernet0),
for Adsl customers please use dialler0.
6. c lick OK.
5. s elect Dynamic.
6. i n the Direction drop down menu:
select From Inside to outside.
7. c lick pull down menu and select
Create a new rule (aCL) and select...
15
7. c lick Save.
2. dynamic Port Address translation
STEpS:
1. c lick Configure – as shown above.
2. c lick NaT from the Tasks section.
3. s elect Edit NaT Configuration tab.
4. c lick add.
8. f ill in name, type and Description as appropriate.
9. c lick add
complete the following fields:
10. action.
11. Description (optional).
12. Source Host/Network source.
13. protocol and Service.
14. select Ip in the Ip protocol.
15. click OK.
please note: the source should be the trusted network.
17. c lick on Save.
d. s tatic Port Address translation (static PAt)
static port address translation is required if the customer has
a web server located within their lAn which they would like
to give internet users access to. this assumes the customer
has appropriate security measures on the server before
configuring this feature, if you are unsure please consult
your it specialist or contact your Account representative
for more information on our it services solutions.
the following screens show how to configure PAt
for web (port 80)
the following screen will be provided:
16. c lick OK.
STEpS:
1. c lick Configure – as shown above.
2. c lick NaT from the Tasks section.
3. s elect Edit NaT Configuration tab.
4. c lick add.
16