Telstra 877W User Manual page 14

11. "hoW to" for eAch feAture
A. c isco vPn client configuration
this feature is available through telstra if you have purchased
the telstra business broadband extras 'router support service
(rss)'. for more information on this telstra business
broadband extras, please contact your telstra Account
representative or call 1800 655 744.
STEpS:
1. s tart the cisco vPn client.
2. c lick New.
25
3. Connection Entry – is the name of this
particular profile.
4. Description – a meaningful description of the profile.
5. Host – the public iP address of the router.
6. Group authentication:
Name – user defined, this group name Must be the
same as the one defined in section 11(b) step 18.
password – user defined.
b. c onfiguring an iPsec vPn on the router
this section shows how to configure the router to act as an
iPsec vPn termination point to allow remote users who have
installed cisco vPn client on their personal computer, to
securely connect to the corporate local area network. this
feature is available through telstra if you have purchased the
telstra business broadband extras 'router support service
(rss)'. for more information on this telstra business
broadband extras, please contact your telstra Account
representative or call 1800 655 744.
5. c lick Next.
STEpS:
1. c lick Configure.
2. c lick VpN in the Tasks section.
3. c lick Easy VpN Server.
4. c lick Launch Easy VpN Server Wizard.
6. c lick Unnumbered to.
7. c lick the drop down menu and choose the interface which
faces the internet.
8. f or authentication, select pre-shared Keys.
9. c lick Next.
26