Lenovo ThinkPad E30 Hardware Maintenance Manual page 121

Table 28. Removal steps of wireless LAN antenna assembly, wireless WAN antenna
assembly, and LCD rear cover assembly (continued)
Cable routing: When you install the antenna assembly, route the cables as
shown in the figures below. As you route the cables, make sure that they are not
subjected to any tension. Tension could cause the cables to be damaged by the
cable guides, or a wire to be broken.
a : Wireless LAN MAIN antenna (gray)
b : Wireless WAN MAIN antenna (red)
c : Wireless WAN AUX antenna (blue)
d : Wireless LAN AUX antenna (black)
a
3
3
3
b
Removing and replacing a FRU
3
3
3
c d
113