Lenovo ThinkPad E30 Hardware Maintenance Manual page 112

104
ThinkPad Edge 13" and E30 Hardware Maintenance Manual
Note: Applying labels to the base cover
The new base cover FRU is shipped with a kit containing labels of several kinds.
When you replace the base cover, you need to apply the following labels:
4
Information label under battery
6
FCC label
7
Homologation label
13
Serial number blank label
?
SIM information label under battery
Following labels need to be peeled off from the old base cover, and need to be
put on the new base cover.
1
Ethernet label
2
Windows license label (COA)
3
SID card label
5
SIM ICCID label
8
Brazil ANATEL wireless LAN label
9
Israel label
10
SIRM label
11
China wireless WAN label
12
Brazil ANATEL Bluetooth label
14
Wireless WAN label
15
Wireless LAN label
For some models, you also need to apply one or two FCC labels. Check the old
base cover; if it has one or two FCC labels, find duplicates of them in the label
kit and apply them to the new base cover.
For the location of each label, refer the following figure:
15
14
13
12
11
10
9
8
7
1 2 3
6
4
5