Adjusting The Option Menu - Hisense HSL2629HDI Instruction Manual

Using the TV features

Adjusting the Option Menu

1 Press [MENU] to open the main menu.
2 Press [V+/V-] to select Option, then press
enter the Option menu.
Blue Screen
Osd Settings
Time
Restore Factory Default
Select
In the Option OSD, you can set the following items:
Blue Screen - Press
Ÿ
Blue Screen effect by select "On" or "Off". (Only
available for ATV)
Osd Settings
Ÿ
Osd Settings contains Transparency and OSD
Timeout, when you select Osd Settings, press
[V+/OK] to enter, you can set their values by using
[V+/V-] .
Transparency: you can adjust the Osd
v
transparency from 0-6.
Osd Timeout: The time it takes the OSD to
v
disappear when no operations are performed.
You can change it from 5 seconds, 10 seconds,
15seconds, 20seconds, 25seconds, 30seconds,
35seconds, 40seconds, 45seconds, 50seconds,
55seconds and 60seconds.
Time - Press
[P+/P-]
Ÿ
Osd, and press [OK] to enter.
It contains Clock, Off Time, On Time, Sleep Timer
and Time Zone.
Clock
Off Time
On Time
Sleep Timer
Time Zone
Select
[P-/OK]
Option
Off
Conf irm Ex it
[V+/V-] to turn on or turn off the
to select Time in the Option
Option
01/Jul 12:00
Off
Off
Off
Western Australia GMT+B
Ex it
Conf irm
Clock - display current date and time.
- 1 Press
Off Time
to
2 Press
3 Press MENU to exit.
On Time- 1. Press
2. Press
3. Press MENU to exit.
Sleep Timer - Press
Time Zone - Press
Restore Factory Default
Select
be asked via the OSD to confirm your selection. Press
[OK] and your TV will be reset to factory settings.
Note: Password and parental options are NOT reset.
19
[P+/P-] to select Off Time, and press
[OK] to enter.
[P+/P-]
to select Repeat, Hour or Minute,
[V+/V-]
and use to set the Off time.
Repeat Off
Hour 00
Minute 00
OK
[P+/P-] to select On Time, and press [OK]
to enter.
[P+/P-] to select Activate, Hour or
Minute, and use [V+/V-]
to set On time.
Activate Mon~Sat
Hour 0
Minute 00
Volume 30
Mode DTV
OK
[V+/V-]
to set the sleep timer between 0-
240minutes.
[V+/V-]
to set a time zone corresponding
to your region.
Restore Factory Default and press [OK], you will