Canon MG2900 Series Manual page 431

Mg2900 series canon
Hide thumbs Also See for MG2900 Series:
Table of Contents

Advertisement

Note
• Cleaning the paper feed roller will wear the roller, so perform this procedure only when necessary.
Is the inside of the machine dirty?
Check8
When performing duplex printing, the inside of the machine may become stained with ink, causing the printout to
become smudged.
Perform the Bottom Plate Cleaning to clean the inside of the machine.
Cleaning the Inside of the Machine (Bottom Plate Cleaning)
Note
• To prevent the inside of the machine from stains, set the paper size correctly.
Set the time to dry the printed surface longer.
Check9
Doing so gives the printed surface enough time to dry so that paper smudged and scratched are prevented.
1. Make sure that the machine is turned on.
2. Open the Canon IJ Printer Utility.
Opening the Canon IJ Printer Utility
3. Select Custom Settings in the pop-up menu.
4. Drag the Ink Drying Wait Time: slide bar to set the wait time, and then click Apply.
5. Confirm the message and click OK.
431

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mg2922Pixma mg2900 seriesPixma mg2920Pixma mg2922Pixma mg2924

Table of Contents