Computer Stops Operating During Scanning - Canon MG2900 Series Manual

Computer Stops Operating during Scanning

Restart the computer, reduce the output resolution and scan again.
Check 1
Resolution
Delete unnecessary files to obtain sufficient free hard disk space, then scan
Check 2
again.
Error message may appear if there is not enough hard disk space to scan and save, when the image size is too
large (such as when scanning a large item at high resolution).
In Folder to Save Temporary Files of IJ Scan Utility, specify a folder on a
Check 3
drive with sufficient free space.
Settings (General Settings) Dialog
Multiple devices may be connected to USB ports.
Check 4
Disconnect devices other than your scanner or printer.
445