About Pictbridge (Wireless Lan) Print Settings - Canon MG2900 Series Manual

About PictBridge (Wireless LAN) Print Settings

Settings on a PictBridge (Wireless LAN) Compliant Device
This section describes the PictBridge (Wireless LAN) function of the machine. For the print settings on a
PictBridge (Wireless LAN) compliant device, refer to the instructions given in the device's instruction
manual.
Note
• In the following description, names of setting items are given according to those used in Canon-brand
PictBridge (Wireless LAN) compliant devices. Setting item names may be different depending on the
brand or model of your device.
• Some setting items explained below may not be available on some devices. When you cannot
change print settings on a device, the printer prints images as follows:
Paper size: 4" x 6"/ 10 x 15 cm
Paper type: Photo
Layout: 1-up, Bordered
Date/File No. Print: Not printed
The following settings can be used when printing from a PictBridge (Wireless LAN) compliant device.
Paper size 4" x 6"/ 10 x 15 cm, 5" x 7"*, A4, 8.5" x 11"(Letter)
* Can be selected only on certain Canon-brand PictBridge (Wireless LAN) compliant devices.
(May not be selected depending on the device.)
Paper type • Default: Photo Paper Plus Glossy II PP-201
• Photo:
• Plain:
Layout Default (Bordered), Index, Bordered*
* With a Canon brand PictBridge (Wireless LAN) compliant device, selecting items with "i" mark
allows you to print shooting info (Exif Data) on the margins of the specified data (1-up). (May not
be available with some Canon-brand PictBridge (Wireless LAN) compliant devices.)
Print date & file Default (Off: No printing), Date, File No., Both, Off
no.
Trimming Default (Off: No trimming), On (follow the camera's setting), Off
Photo Paper Plus Glossy II PP-201
A4/Letter sized plain paper
299