SimplyGo Quick-start guide...
Getting started This guide is intended to help you get started using the SimplyGo portable oxygen concentrator. If you have questions that are not answered in this guide, please consult the SimplyGo User Manual or contact your homecare provider. Important: The first time you charge the battery, be sure to charge it fully.
Control panel display 1. Power Turns SimplyGo on and off 2. Alarm silence Turns the audible alarm off 3. Mode Selects one of the three possible operating modes 4. Display screen Shows information about the operating status of the device 5.
3. Connect a nasal cannula to the oxygen outlet on top of the device. Connect a nasal cannula to the top of SimplyGo. To avoid a disruption of oxygen, route the cannula so that it is not pinched or kinked. A standard single lumen nasal cannula and tubing should be used.
4. Turn on SimplyGo. Turn the device on by pressing the Power button twice. After the first press, the display screen and the button backlights turn on. Press the Power button a second time to place the device in operating mode. This second press helps prevent unwanted starts or inadvertent changes in oxygen flow.
1. Set the mobile cart on a level surface, hold the handle with one hand, and open the base support. 2. With SimplyGo properly positioned in its carrying case, place the device on the base of the cart and secure...
Oxygen delivery modes Pulse mode When SimplyGo is in the Pulse mode, it detects when the user begins to take a breath and then delivers a pulsed volume of oxygen determined by the setting number. Continuous Flow mode In Continuous Flow mode, a constant flow of oxygen is supplied based on the setting number (in liters per minute).
North America +1 425 487 7000 800 285 5585 (toll free, US only) Respironics and SimplyGo are trademarks of Respironics, Inc. and its affiliates. All rights reserved. Please visit www.philips.com/simplygo © 2011 Koninklijke Philips Electronics N.V. All rights are reserved.