HEAD SUPPORT
Use Head Support to provide
additional support for a young
infant's head.
Head Support can be used
a
with or without newborn insert.
To Install Head Support, pull
b
Fastener Tabs through slots and
then attach together on underside
of carrier.
Fastener Tabs must always
connect through slots ABOVE
the slots used for harness.
NEVER use Head Support with harness in upper slots.
Head support could interfere with harness adjustment.
a
b
22
CARRIER/BASE ATTACHMENT
To secure carrier to base,
1
align carrier with base and push
firmly into base. Listen for a click.
Pull up on Carrier to verify that
it is securely latched.
If using a blanket/cover, make
sure it does not interfere with
attachment hooks.
To release carrier from base,
2
pull release handle while lifting
carrier out of base.
Be sure to hold carrier securely
with both hands when removing.
1
2
23