Yamaha YZF-R6(S) Supplementary Service Manual page 19

Manuals by Motomatrix / www.motomatrix.co.uk / The Solution For Lost Motorcycle Coded Keys
N To the coolant reservoir tank
O To the oil level switch, sidestand switch and A.C.
magneto
P To the intake temperature sensor (air filter case)
Q Install the wire harness wrapping clamp to the stay
of the throttle body.
R Pass the wire harness over the throttle air vent
hose.
S Pass the wire harness between frame and coolant
hose.
T Pass it through the frame hole.
U Pass the left handlebar switch lead and main switch
lead over the immobilizer unit lead.
V Do not catch the coupler when the air filter case is
assembled.
email: info@motomatrix.co.uk
CABLE ROUTING
W Clamp the wire harness, left and right handlebar
switch leads and main switch lead. Align the tapping
positions of three leads except the wire harness.
Point the tip of the clamp to the front side of the ve-
hicle.
X Route the head light and meter leads under the
frame's lower part from the hollow section of the
cover 2.
Y To the main switch lead coupler
Z To the immobilizer unit coupler
AA To the fuse box and fan motor relay
AB Pass the throttle cables over the cover 2.
AC Branching leads to the fuse box and radiator fan
motor relay shall pass through the guide section
of the cover 2 under the wire harness and then to
the outside of the frame.
–11–
SPEC