Getting Started
In order to get started with your new device, you will need to follow a few simple steps:
1.
Review and confirm that your computer meets the minimum system requirements
2.
Insert and charge the battery
3.
Plug into USB and activate the MiFi 2200
The
MiFi
2200
System
Requirements
To install and use the MiFi 2200, your host computer must meet these requirements:
Operating System
* IN USB CABLE MODE with USB
Cable ONLY
Software
MiFi Software
CPU
Interface
Memory (RAM)
Hard Disk Space
Windows® Vista, XP (SP2 or higher), 2000
NOTE: Windows XP SP1, Windows 2000 SP3 and
SP4 require specific OS patches. For
details please go to www.vzam.net.
- OR -
Mac® OS X 10.4 or higher
Internet browser software (i.e. Internet Explorer,
Netscape, Safari, Firefox, AOL)
Mobile Broadband/USB Cable Mode: VZAccess Manager
included on the device, no CD required.
Wi-Fi Mode: MiFi Settings
166 MHz or higher
One Type-A USB port and/or802.11 b/g
128 MB
100 MB
11