Getting Started; Fivespot System Requirements; Inserting And Charging The Battery - Verizon Wireless Fivespot User Manual

Getting Started

This section provides information and instructions for setting up the Fivespot 3G Global Hotspot for the first time. Before you
begin using your device, you must first install VZAccess Manager on your computer. The comprehensive Quick Reference
Guide that was included in the box when you purchased your device and the VZAccess Manager Software User Guide details
the installation and configuration of your Fivespot with VZAccess Manager.
Important:
Installation must be performed within the Mobile Broadband and/or
NationalAccess coverage area.
Important:
Before installing your new software, delete or uninstall any previously existing device or dialer
software from your computing system.

Fivespot System Requirements

To install and use Fivespot, your host computer must meet below requirements:
Operating System
* IN USB MODEM MODE with
USB Cable ONLY
Software
FIVESPOT Software
CPU
Interface
Memory (RAM)
Hard Disk Space

Inserting and charging the battery

1. Open the battery compartment, located on the bottom of the device.
2. Insert the battery by lining up the gold contact points on the battery with the gold contact points in the battery compartment.
Windows XP (SP3 or higher), Windows Vista (32bit/ 64bit SP1 or
higher), Windows 7
NOTE: For details please go to www.vzam.net.
- OR -
MAC OS X 10.4 or higher
Internet browser software (i.e. Internet Explorer 7，Firefox 3.0 or
higher.)
Mobile Broadband/USB Cable Mode: VZAccess Manager included
on the device, no CD required.
Wi-Fi Mode: FIVESPOT Settings.
500 MHz or higher
One Type-A USB port or 802.11b/g
128 MB
100 MB
10