Thread Take-Up Mechanism - Brother LK3-B430E Mark II Service Manual

4-11. Thread take-up mechanism

!5
1. Remove the two screws q, and the solenoid setting plate w from the machine head.
2. Remove the spring e from the spring hook r.
3. Loosen the set screw y of the solenoid joint t, and remove the solenoid joint t from the thread take-up
solenoid u.
4. Remove the screw i, the spring washer o, the washer !0 and the nut, 3.57 !1 from the solenoid setting
plate w.
5. Remove the two stud screws ! 2 , and the thread take-up lever ! 3 .
6. Remove the retaining ring ! 4 , the crankshaft ! 5 and the washer ! 6 .
q
w
u
r
i
o
!0
LK3-B430E Mark II
!1
r
e
!3
y
!2
4. DISASSEMBLY
t
!4
!6
22