10. ELECTRIC MECHANISM
Contact failure
The connectors functions are divided into four categories. Some connectors may belong to more than one
group. Be sure to investigate another category if a problem is not found in one category.
For the details of connections, refer to the control circuit block diagram at the end of this manual.
1. Feed mechanism
• Home position is not properly detected.
• Error E-A0 is displayed.
• The work clamp does not operate.
• Error E-60 is displayed.
• Forward feed does not operate correctly.
• Error E-A0 is displayed.
• Sideways feed does not operate correctly.
• Error E-A0 is displayed.
2. Work clamp lifter and thread trimmer mechanisms
• The work clamp does not operate.
• The machine does not operate.
• The work clamp does not operate.
• Thread trimming is not performed.
• Error E-61 is displayed.
• Thread take-up lever does not operate.
65
Problem
Problem
LK3-B430E Mark II
Connector No. and position
Main circuit board
Sewing
X home
Y home
clamp
position
position
sensor
sensor
sensor
Main circuit board
Y pulse
motor
Main circuit board
X pulse
motor
Connector No. and position
Main circuit board
Control
box
Foot
switch
Main circuit board
Sewing
Thread
clamp
trimming
solenoid
solenoid
Main circuit board
Thread take-
up solenoid