SWINGARM AND DRIVE CHAIN
EB707120
REMOVING THE DRIVE CHAIN
1. Remove:
EB707400
CHECKING THE SWINGARM
1. Check:
2. Check:
3. Wash:
7 - 73
• drive chain
(with the drive chain cutter)
Drive chain cutter
90890-01286
NOTE:
Only cut the drive chain if it or the swin-
garm is to be replaced.
• swingarm
Bends/cracks/damage → Replace.
NOTE:
If the swingarm must be replaced, the
drive chain must be cut with a drive
chain cutter.
• pivot shaft
Roll the pivot shaft on a flat surface.
Bends → Replace.
WARNING
WARNING
Do not attempt to straighten a bent
pivot shaft.
• pivot shaft
• dust covers
• spacer
• bearings
Recommended cleaning solvent
Kerosine
CHAS