CyberData 11171 Operation Manual page 55

5. Select Browse, and then navigate to the location of the firmware file.
6. Click Submit.
Note
Note
Table 2-18
Operations Guide
Figure 2-23. Upgrade Firmware Page
Do not reboot the board after pressing the Submit button.
This starts the upgrade process. Once the device has uploaded the file, the Uploading
Firmware countdown page appears, indicating that the firmware is being written to flash.
The device will automatically reboot when the upload is complete. When the countdown
finishes, the Upgrade Firmware page will refresh. The uploaded firmware filename should
be displayed in the system configuration (indicating successful upload and reboot).
shows the web page items on the Upgrade Firmware page.
Table 2-18. Firmware Upgrade Parameters
Web Page Item Description
File Upload
Firmware Version Shows the current firmware version.
Use the Browse button to navigate to the location of the
Intercom firmware file that you want to upload.
Click on the Submit button to automatically upload the selected
firmware and reboot the system.
930446F
Implementing the VoIP V3 Zone Controller
Upgrading the Firmware
CyberData Corporation
50