Selecting A Shift Position; Selecting A Drive Mode - Honda BIG RED 2009 Owner's Manual

Basic Operation
To stop the engine, turn the ignition switch to the OFF ( ) position.
Remember to apply the parking brake and remove the key if you plan to
leave the vehicle.

Selecting a Shift Position

You can drive your vehicle either forward or backward by moving the
shift lever from neutral (N) to drive (D) or reverse (R).
Remember, to avoid damaging the transmission, move the shift lever
only when the vehicle is stopped and the engine is idling.
See page 19 for additional information.

Selecting a Drive Mode

2WD This mode supplies power to the rear wheels only, and
both the front and rear differentials are unlocked. This
mode is best for surfaces with good traction, and for
operation on lawns.
4WD This mode supplies power to the front and rear wheels,
(Rear Diff and locks the rear differential. Steering will require
Lock) slightly more effort than with 2WD. This mode is
recommended for driving on surfaces with relatively poor
traction.
4WD
This mode supplies power to the front and rear wheels,
(All Diff
and locks the front and rear differentials. As a result,
Lock)
steering will require extra space and effort. Select this
mode for maximum traction.
Before using the drive mode select lever to change from one mode to
another, be sure the vehicle is stopped and the engine is idling. See
pages 20, 21 for additional information.
54 Basic Operation & Driving Guidelines