Honda BIG RED 2009 Owner's Manual page 37

Seats
3. Lift the seat-back off the support rod.
support rod
4. Reposition the seat-back, placing the upper hooks over the support
rod and lining up the upper bolt holes with the mounting plate.
5. Screw the bolts into the upper row of bolt holes and tighten them to
the specified torque:
9 lbf ft (12 N m , 1.2 kgf m)
upper hook
support rod
To return the seat-back to a more rearward position, follow the general
instructions above, setting the lower hooks on the support rod and using
the lower bolt holes.
28 Instruments & Controls
upper hook
bolts
mounting plate