Control Panel Explanation - PetNovations CatGenie Operation

CONTROL PANEL BUTTONS, BEEPS, AND BLINKS.
It's how you and your CatGenie
The magic of CatGenie is that with two buttons
you can start a Cleaning Cycle when you want.
You can program your CatGenie to Start on
its own. You can set a Child Lock.
Fix an error.
Pause for a
problem
and mute
beeps.
HOW DO I RESTART A WASH
AFTER SETTING UP PAUSE
MODE?
PRESS &
RELEASE START CYCLE/
PAUSE BUTTON.
HOW CAN I MUTE
THE WARNING
BEEPS?
PRESS &
RELEASE START CYCLE/
PAUSE BUTTON.
www.catGenie.com
3
4
5
6
7
BUTTONS
1. START CYCLE/PAUSE Button
Use to manually START or PAUSE a Cleaning Cycle.
•
To START a Cleaning Cycle, Press & Release the Start Cycle/Pause Button
•
To PAUSE a Cleaning Cycle (Auto or Manually initiated) Press & Release
the Start Cycle/Pause Button. When in PAUSE, the In Process LED Blinks
•
To take off PAUSE, Press & Release Start Cycle/Pause Button again. If left
in PAUSE mode, the Cleaning Cycle automatically resumes after 10 minutes
2. AUTO SETUP Button
Once programmed, automatically STARTS Cleaning Cycles.
•
Use to Program the TIMES that you want the CatGenie to run
•
Use to Program the NUMBER of washes (one to four) per day. See Page 5.
BEEPS & BLINKS
3. DAILY CYCLES LED Light Indicators
Each LED that lights indicates the number of Cleaning Cycles programmed
to start automatically every day, i.e. LED 1& 2 indicates 2 cleaning cycles.
4. IN PROCESS LED Light Indicator
In Process LED lights while a Cleaning Cycle is in progress. This LED blinks
when CatGenie is in PAUSE mode.
5. CARTRIDGE LED Light Indicator.
•
When the Smart Cartridge has 10 uses left, it alerts you with
repetitive Beeps and a lighted Cartridge LED
•
When Cartridge has 3 uses left, Beeps and Cartridge LED stay lit
•
When Cartridge is empty, Beeps and LED stay lit, and Unit WON"T RUN
•
Press START CYCLE/PAUSE to mute Beeps and then replace Cartridge
If anyone removes a full Smart Cartridge, unit Beeps and Cartridge
Indicator LED Blinks. See Page 7 for details.
6. ERROR LED Indicator.
Error LED Blinks and unit Beeps when you have a Cleaning Cycle problem.
The number of Beeps and Blinks indicates which problem. Count the beeps
and check Trouble Shooting to determine the problem. See Page 10 for details.
7. CHILD LOCK LED Indicator.
Child Lock LED lights and stays lit only when you have Child Lock set.
See Page 6 for details.
™
communicate.
4
1
2
1-888-735-3927