Chrysler 2013 200 Owner's Manual page 93

Can the rear-facing child restraint touch the
back of the front passenger seat?
Can the head restraints be removed?
Can the buckle stalk be twisted to tighten the
seat belt against the belt path of the child
restraint?
Installing A Child Restraint with a Switchable
Automatic Locking Retractor (ALR)
1. Place the child seat in the center of the seating
position. For some second row seats, you may need to
recline the seat and/or raise the head restraint to get a
better fit.
2. Pull enough of the seat belt webbing from the retractor
to pass it through the belt path of the child restraint.
Do not twist the belt webbing in the belt path.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 91
Yes Contact between the front passenger seat and
the child restraint is allowed, if the child
restraint manufacturer also allows contact.
No
Yes In positions with cinching latch plates
(CINCH), the buckle stalk may be twisted up
to 3 full turns. Do not twist the buckle stalk in
a seating position with an ALR retractor.
3. Slide the latch plate into the buckle until you hear a
"click."
4. Pull on the webbing to make the lap portion tight
against the child seat.
I n f o r m a t i o n P r o v i d e d b y :
2