Using This Feature; Controlling The Ipod Or External Usb Device Using Radio Buttons; Play Mode - Chrysler 2013 200 Owner's Manual

NOTE: If the audio device battery is completely dis-
charged, it may not communicate with the iPod /USB/
MP3 control system until a minimum charge is attained.
Leaving the audio device connected to the iPod /USB/
MP3 control system may charge it to the required level.

Using This Feature

By using iPod cable or external USB device to connect to
USB port:
• The audio device can be played on the vehicle's sound
system, providing metadata (artist, track title, album,
etc.) information on the radio display.
• The audio device can be controlled using the radio
buttons to Play, Browse, and List the iPod contents.
• The audio device battery charges when plugged into
the USB/AUX connector (if supported by the specific
audio device)
UNDERSTANDING YOUR INSTRUMENT PANEL 267
Controlling The iPod Or External USB Device
Using Radio Buttons
To get into the iPod /USB/MP3 control mode and access
a connected audio device, either press the "AUX" button
on the radio faceplate or press the VR button and say
USB or Switch to USB . Once in the iPod /USB/MP3
control mode, audio tracks (if available from audio
device) start playing over the vehicle's audio system.

Play Mode

When switched to iPod /USB/MP3 control mode, the
iPod or external USB device automatically starts Play
mode. In Play mode, the following buttons on the radio
faceplate may be used to control the iPod or external
USB device and display data:
• Use the TUNE control knob to select the next or
previous track.
I n f o r m a t i o n P r o v i d e d b y :
4