Download Print this page

Safety Instructions - Viper TP20WD Instructions Manual

20 gallon wet & dry vacuum, 110" water lift vac motor, 24" front mount squeegee assembly, 50' cord

Advertisement

Description:
Each Renown wet vacuum features
an automatic float shut off system
designed to keep water and foam out
of the vacuum motor. The unique tip
and pour design makes draining into
tall slop sinks or toilets easy to do.
The large 1.33 HP vacuum motor pro-
vides superior suction resulting in dry,
readily usable floors. The dry filter bag
element converts this tip and pour
vacuum into a dry vacuum for the
appropriate applications. A drain hose
is attached to the front of the machine
for convenient draining. A 24-inch front
mounted squeegee and contractor
tool kit is included with each machine.
Features/Benefits:
Tip & Pour Tank: 20-gallon blow
molded tank has 12-year warranty.
Tank will not rust. Removable tip & pour
drain allows user to easily empty tank.
Hose Drain: 1" flexible drain hose is
convenient for facilities with floor
surface drains.
Front Mount Squeegee: 24" front
mount squeegee assembly is standard
with an optional 30" squeegee
assembly.
Transport Wheels: Non-marking gray
rubber wheels will not mark floors.
Modular Vacuum Motor: No tools
needed to remove or replace vacuum
head. Automatic float shut off prevents
motor water damage.
Crush Proof Vacuum Hose: 9' flexible
hose will not crush if stepped on.
Micro Filter: Dry filter keeps dirt and
dust from exiting vacuum when used
in dry applications. Wet (blue mesh)
filter prevents foam from entering
vacuum motor.
Warranty: 3-year vac motor replace-
ment. 12-year tank warranty against
manufacturer defect.
20 GALLON WET DRY VACUUM

SAFETY INSTRUCTIONS

! WARNING !
IMPORTANT SAFETY
INSTRUCTIONS
Carefully read and understand this
manual before operating this
machine.
This machine must be grounded!
Grounding provides a path of least
resistance for electric current. To
reduce the risk of electric shock
should the machine malfunction This
appliance is equipped with a cord
having an equipment-grounding con-
ductor and grounding plug. The plug
must be plugged into an appropriate
outlet that is properly installed and
grounded in accordance with all local
codes and ordinances. Do not remove
the ground pin under any circum-
stances.
Grounded
Outlet
Prong or
Grounding Pin
Grounded
Outlet Box
This machine is intended for commer-
cial use. It is constructed for use in an
indoor environment and is nor intended
for any other use. Use only recom-
mended accessories.
1. Do not operate machine:
– Unless trained and authorized.
– Unless you have read and under-
stand the operators manual.
– In flammable or explosive areas.
– With a damaged cord or plug.
– If not in proper operating condition.
– In outdoor areas.
– In standing water.
– Without bag/filters in place.
– With the use of extension cords.
2. Before operating machine:
– Make sure all safety devices are in
place and operating properly.
3. When using machine:
– Do not run machine over cord.
– Do not pull machine by cord or
plug.
– Do not pull cord around sharp
edges or corners.
– Do not unplug by pulling on the
cord.
– Do not stretch cord.
– Do not handle plug with wet hands.
– Keep cord away from heated
surfaces.
– Do not pick up burning or smoking
debris such as cigarettes, matches
or hot ashes.
– Report machine damage or faulty
operation immediately.
4. Before leaving or servicing
machine:
– Turn off machine.
– Unplug cord from outlet.
5. When servicing machine:
– Unplug cord from outlet.
– Use manufacturer supplied or
approved replacement parts.
To avoid electrical shock, please
replace the power cord immedi-
ately if any damage is being detected.
The replacement must be performed
only by an authorized person or by
our customer service center.

Advertisement

loading