Singer 2802 Service Manual page 25

Service Manual
Removal:
1. Remove arm top cover and the stitch width bracket assembly.
2. Remove screw (A) and eccentric bushing (B).
3. Remove lever (D) and spring (C).
Replacement:
1. Replace these parts the same way as described above, but in a reverse order.
Removal:
1. Remove arm top cover.
2. Remove retaining ring (A) and spring (B).
3. Pull the follower (C) up to remove it.
Replacement:
1. Replace these parts the same way as described above, but in a reverse order.
Rev. n .
o
Disc Follower Quick Out Lever
Except 2802/2852
Disc Follower
Except 2802/2852
24
358487-001 Mar./2005