Singer 2802 Service Manual page 13

Service Manual
Removal:
1. Remove arm top cover.
2. Remove screw (A).
3. Hold the bottom side of cover (B) and pull it out and up from machine.
Replacement:
1. Replacement of this cover is the same as described above, but in a reverse order.
Removal:
1. Remove the bed bottom rubber feet (C).
2. Remove the screws (D).
3. Remove 8mm hex nut (E).
4. Remove bed bottom cover (F).
Replacement:
Replacement of this bed bottom cover is the same as described above, but in a
1.
reverse order.
Removal:
1. Remove the four screws (G).
2. Remove bed bottom cover (H).
Replacement:
Replacement of this bed bottom cover is the same as described above, but in a
1.
reverse order.
Rev. n .
o
End Cover
Bed Bottom Cover (Free Arm)
Bed Bottom Cover (Flat Bed)
12
358487-001 Mar./2005