Troubleshooting (Electrical); Optional Accessories; Replacement Parts - Powermatic SLR12 Operating Instructions And Parts Manual

Troubleshooting (Electrical)

Trouble
Power light won't
come on (no power).
Power light won't
come on (lack of
phase).
Motor runs
abnormally.
Motor won't run.

Optional Accessories

Part No. Description
6080160 Rip Blade, 12" x 24T x 1"
6080161 Rip Blade, 12" x 36T x 1"
6080159 Rip Blade, 12" x 40T x 1"
SLR12-700 Laser Assembly

Replacement Parts

Replacement parts are listed on the following pages. To order parts or reach our service department, call
1-800-274-6848 between 7:30 a.m. and 6:00 p.m. (CST), Monday through Friday. Having the Model
Number and Serial Number of your machine available when you call will allow us to serve you quickly and
accurately.
Probable Cause
Power source not functioning.
Motor overload relay tripped.
Fuse burned out.
Power source is insufficient.
YL-60P wire is broken.
Poor connection on magnetic switch.
Poor connection on terminals.
Screw loosened.
Motor jammed.
Magnetic switch damaged.
Motor damaged.
Magnetic switch damaged.
Motor burned out.
Remedy
Check three phase power source.
Reset overload relay.
Replace fuse.
Check three phase power source.
Replace YL-60.
Replace magnetic switch.
Replace TB1, TB2.
Tighten screw.
Clean motor.
Replace magnetic switch.
Replace motor.
Replace magnetic switch.
Replace motor.
15