Brewing Coffee Now - Mr. Coffee BVMC-ECX User Manual

NOTE: Make sure the decanter is fully placed on the warming
plate or the water and the grounds will overflow from the
filter basket. An overflow may cause personal injury or
damage to property.
CAUTION! To reduce the risk of damaging the decanter and/
or the risk of personal injury, do not add cold water
to the decanter if the decanter is already hot. Allow
the decanter to cool before using.

BREWING COFFEE NOW

1. To enjoy a more full flavored cup of coffee,
press the Brew Strength button once. The
STRONG Brew Strength red light will turn
on. The coffeemaker will remain in the Brew
Strength you have selected until you change
it back to REGULAR strength by pressing the
Brew Strength button or until you unplug the
machine (Figure 5).
NOTE: Once brewing has started the brew
strength cannot be changed during the brew
cycle. The coffeemaker automatically defaults to
regular strength.
2. Complete the steps in the Adding Water
and Coffee section and with the glass
decanter and the filter basket securely in
place, turn the coffeemaker on by pressing
the Select/Off button once. The BREW NOW
green light will turn on to signal that the
coffeemaker is on and brewing (Figure 6).
3. After brewing is complete an audible ready signal will
sound to let you know your coffee is ready.
NOTE: The default is for the audible ready signal to sound
after brewing. To turn off the audible ready signal, hold the
SET DELAY button for 5 seconds. To turn the audible ready
signal back on, hold the SET DELAY button again for 5 second.
14
BVMC-ECX41_14ESM1.indd 15-16
4. After the used coffee grounds have cooled, carefully
remove the filter basket and discard them.
NOTE: The brew basket lid is hot after brewing. Always allow
the coffeemaker to cool down before cleaning.
5. Prior to making a second pot of coffee, turn the
coffeemaker off. This will reset the FRESH BREW™ TIMER
feature. To turn the coffeemaker off, press the Select/Off
button all lights will turn off.
6. Make sure the decanter is empty before starting to brew
coffee.
7. Be sure to turn your coffeemaker off when no longer
using it.
The Fresh Brew™ Timer Feature
The FRESH BREW™ TIMER feature lets you know
how long your coffee has been waiting for
you. At the start of the brew cycle, the FRESH
BREW™ TIMER feature will automatically be
activated.
Figure 5
Press the FRESH BREW™ TIMER button once
(Figure 7) and the clock time will change to
show the amount of time that has passed since
brewing completed. Push again to display
current time.
NOTE: The BREW NOW green light must be on for the FRESH
BREW™ TIMER feature to operate. The time and delay brew
time cannot be set when the fresh brew time is displayed.
Figure 6
Figure 7
15
10/04/14 2:41 PM