Center Point; Double Cut - Ellison eclips EC-C1200 User Manual

This function makes it easy to center a shape inside (or around) another shape or within a particular area of a shape. Have
fun with this function and discover its countless options!
SPEED: 4
PRESSURE: 2
12"x12"
Cardstock L
Shadow
Pieces
Embellishment
H: 5.00" W: 5.38"
All
1
Select the desired shape, as well as its
size and options.
SPEED: 4
PRESSURE: 2
12"x12"
Cardstock L

Center Point

Shadow
Pieces
Embellishment
H: 5.00" W: 5.38"
All
4
"Center Point" will appear on the
screen.
Only one shape can be
added to the Queue at
a time while using
Center Point.
Select this function when using thick materials or intricate designs that may not be completely cut through.
Cut the shape as normal, then move the cut shape with the Blade Positioner Control just enough to check the cut. If the cut
is not completely through the material, select Double Cut from the Pop-Up Menu to cut exactly over the previous cut. This
option may be used as many times as necessary to completely cut through the material.
Do not remove Cutting Mat from Machine before using Double Cut.
SPEED: 4
PRESSURE: 2
12"x12"
Cardstock L
Shadow
Pieces
Embellishment
QTY: 1 H: 5.00"
All
2
Press . Press
to select, or press
Center Point.
QTY: 1
5
Move laser to desired center of shape.
Press
of the cut, the laser will return to the
center point of the shape.
R
Use Laser Cut Preview
P
(see pg. 26) to ensure
your cut will fit in the
area desired.
Setup
Space
Setup
Space
Setup
Space
Add to Favs
Blade Holder
Center Point

Double Cut

Laser Cut Preview
Pen Holder
Print 2 Cut
Rotate
W: 5.38" QTY: 1
R
3
to highlight and
to select
P
R
Center Point P
6
Setup
to cut the shape. At the end
Space
Setup
Space
ADVANCED
CENTER POINT
Blade Holder
Laser Point
The Laser will turn on next to the Blade
Holder in the Machine.
SPEED: 4
PRESSURE: 2
12"x12"
Cardstock L
Center Point
Shadow
Pieces
H: 2.00" W: 1.64"
All
To cut another shape, select the shape
and press . The shape will use the
same center point as the previous shape
unless you move the laser.
R
Center Point is active
P
until turned off in Pop-Up
Menu by selecting Center
Point again.
Setup
Space
DOUBLE CUT
25
QTY: 1