Table of Contents
Advertisement
This option allows further customizing of material size. Use this option when cutting an odd-sized (i.e., scrap) piece of
material or when wanting to confine a design to one area of the material. Just input top left corner and bottom right
corner of area to be cut. The Machine will now stay within this area.
1
Place custom-size material at upper left
corner of Cutting Mat. Load Cutting
Mat into Machine.
SPEED: 4
PRESSURE: 3
12"x12"
Cardstock M
12"x12"
8 1/2" x 11"
8"x8"
6"x6"
A4
H: 3.00"
W: 3.93"
12"x24"
Use Blade Navigator to move laser
Dimensions
position to upper left of material
Laser
to select
4
Use Blade Positioner Control to place
Laser light on upper left corner of
desired cutting area of material.
Press
to select.
SPEED: 4
PRESSURE: 3
L7.92"x5.63"
Cardstock M
H: 3.00"
W: 3.93"
to select material size;
for more options
6
The custom dimension now appears
as material size. Press
a design. The Machine will cut within
specified dimensions.
Press
to open the Pop-Up Menu to reveal several advanced cutting functions. The items in the Pop-Up Menu can
be selected with either
exit the Pop-Up Menu, press
R
P
SPEED: 4
PRESSURE: 3
12"x12"
Cardstock M
12"x12"
8 1/2" x 11"
8"x8"
6"x6"
A4
H: 3.00"
12"x24"
Dimensions
Setup
Laser
2
In the Options Menu, select material size
Space
option. Press
SPEED:4
R
PRESSURE: 3
12"x12"
P
Cardstock M
12"x12"
8 1/2" x 11"
8"x8"
6"x6"
A4
QTY: 1
H: 3.00"
12"x24"
Use Blade Navigator to move laser
Dimensions
position to lower right of material
Laser
5
Move Laser light to the lower right corner of desired cutting area of material and press
This directs Machine to stay within specified dimensions.
Setup
Space
suggested min
Setup
height=2.5"
Space
H: 3.00"
QTY: 1
to Esc
7
If you edit shape size larger than material
dimensions, the Machine will revise size
and select
to the largest possible to fit.
and
or with a "hot key" by pressing the underlined letter in each item. To
at any time.
R
P
W: 3.93"
QTY: 1
to select Laser Dimensions
for more options;
to Esc
3
to select Laser.
R
P
W: 3.93"
QTY: 1
R
to select
P
Setup
Space
W: 5.39"
QTY: 1
to edit height;
to Esc
to apply changes;
to width
ADVANCED
Setup
LASER SETTING
Space
Blade Holder
Laser Point
The Laser light is located left of Cutting
Blade Holder and will appear as a red dot
on material to indicate where Blade will cut.
POP-UP MENU
23
.
Advertisement
Table of Contents
