Zipconnect™ Instructions; Introduction - Sharper Image HW562 Instructions Manual

ZipConnect

Introduction

The ZipConnect™ built into your iJoy
Robotic Massage Chair allows you to conveniently connect any
®
audio player with a headphone jack (MP3 player, iPod
CD player) and play music through the chair's built-in stereo
speakers and subwoofer.
The ZipConnect™ interchangeable module features a retractable
cable that is compatible with any standard headphone jack. For
the iPod, iPod mini or iPod Shuffle™, you may purchase special
interchangeable ZipConnect™ modules with a custom designed
connection that charges your iPod's internal battery as you
listen to music. These ZipConnect™ charge+play modules
for iPods, iPod minis and iPod Shuffle are available from The
Sharper Image by calling 1-800-344-4444, ordering online
at www.sharperimage.com or visiting a Sharper Image store
near you. (See Replacing the ZipConnect™ Module for
more information.)
1. To extend the ZipConnect™ cable, slowly pull on the mini plug.
2. Insert the mini plug into the headphone jack of your audio player.
Instructions
™
Turbo 2 ZipConnect™
®
, portable
®
38
ZipConnect
3. To activate the amplifier and speaker inside the massage chair,
press the POWER button on the ZipConnect™ console built
into the right-hand armrest.
4. Turn on the connected audio player according to the
manufacturer's instructions.
5. Set the volume on your personal audio player to about 70%
of the maximum volume.
Note: You may need to adjust the volume on your personal
audio player above or below 70% to achieve a desired volume
level or to reduce distortion. Start at 70% of maximum volume
and adjust from there.
6. To adjust the volume of the built-in speakers, press the
VOLUME +/– buttons on the ZipConnect™ console.
Note: Some lightweight personal audio players may vibrate when
placed on the ZipConnect™ console. To minimize vibrations, use
the included rubber pad.
7. Remove the mini plug from your audio player after use.
Operation
™
39