Advertisement
Temperature button
• 1st level: 45±3ºC
• 2nd level: 50±3ºC
• 3rd level: 55±3ºC
Note: Medium level temperature will start while the unit is activated. Long press the
temperature button to turn off this feature
Air button
• The medium level of air compression starts by default when the unit is turned on.
There are 3 levels of intensity (Low, Medium, and High)
• Long press the air button to turn off the pressure function
Stop button
• All 19 red lights will be bright red when powered on. Press the stop button to turn off
heat and air compression
• Short press the stop button to stop all functions. Short press again to restore the
functions
CHARGING INSTRUCTIONS
• Use the DC5V adapter and plug the charging cable with the unit into the adapter
at the USB end and the 3.5 DC end at the other end into the power socket of the
unit. The battery icon on the display panel will turn bright red, which means that the
battery is charging
• When charging is completed, the battery icon will change from red to green
Note: This unit runs on built-in lithium ion rechargeable batteries
• When using the product, if the battery icon flashes red light, the product should be
stopped and charged immediately
• Charge the product using only the DC5V adapter that comes with the unit
LITHIUM-ION BATTERY WARNING
• The device contains a built-in lithium-ion battery. Batteries must be recycled or
properly treated
• Contact your local waste authority for battery recycling and disposal
CLEANING AND MAINTENANCE
1. Let the unit cool before you start cleaning.
2. Use a wet cloth to remove dust and dirt.
3. Do not use corrosive cleaners, such as benzene or a thinner to clean this product.
- 2 -
Advertisement
