Cisco ASR 9000 Series Configuring Network Settings page 9

Configuring the Satellite Network Virtualization (nV) System on the Cisco ASR 9000 Series Router
SUMMARY STEPS
1.
2.
3.
4.
5.
6.
7.
8.
DETAILED STEPS
Command or Action
Step 1
configure
Example:
RP/0/RSP0/CPU0:router# configure
Step 2
nv
Example:
RP/0/RSP0/CPU0:router(config)# nv
Step 3
satellite id
Example:
RP/0/RSP0/CPU0:router(config-nV)#
satellite <100-65534>
Step 4
serial-number <string>
Example:
RP/0/RSP0/CPU0:router(config-nV)#
serial-number CAT1521B1BB
Step 5
description id
Example:
RP/0/RSP0/CPU0:router(config-nV)#
description Milpitas Building12
Step 6
type type_name
Example:
RP/0/RSP0/CPU0:router(config-nV)#
satellite 200 type ?
asr9000v Satellite type
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Configuration Guide
OL-26061-03
configure
nv
satellite <Satellite ID>
serial-number <string> (Optional)
description <string> (Optional)
type <type>
ipv4 address <address>
end
or
commit
Purpose
Enters global configuration mode.
Enters the nV configuration submode.
Declares a new satellite that is to be attached to the host and enters
the satellite configuration submode.
(Optional) Serial number is used for satellite authentication.
(Optional) Specifies any description string that is associated with a
satellite such as location and so on.
Defines the expected type of the attached satellite.
Implementing a Satellite nV System
HC-715