Configuring the Satellite Network Virtualization (nV) System on the Cisco ASR 9000 Series Router
Configuring the host IP address
This procedure gives you the steps to configure a host IP address on a loopback interface.
SUMMARY STEPS
1.
2.
3.
4.
DETAILED STEPS
Command or Action
Step 1
configure
Example:
RP/0/RSP0/CPU0:router# configure
Step 2
interface loopback0
Example:
RP/0/RSP0/CPU0:router(config)# interface
loopback0
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Configuration Guide
OL-26061-03
configure
interface Loopback0
ipv4 address 8.8.8.8 255.255.255.255
end
or
commit
Purpose
Enters global configuration mode.
Specifies the loopback address for the interface.
Implementing a Satellite nV System
HC-717