Technical Data Technical Data - Jonsered GT2123 Operator's Manual

Technical data
Technical data
Engine
3
Cylinder displacement, cm
Cylinder bore, mm
Stroke, mm
Idle speed, rpm
Recommended max. speed, rpm
Speed of output shaft, rpm
Max. engine output, acc. to ISO 8893, kW/ rpm
Catalytic converter muffler
Speed-regulated ignition system
Ignition system
Spark plug
Electrode gap, mm
Fuel and lubrication system
Fuel tank capacity, litre
Weight
Weight without fuel, cutting attachment and guard, kg
Noise emissions
(see note 1)
Sound power level, measured dB(A)
Sound power level, guaranteed L
Sound levels
(see note 2)
Equivalent sound pressure level at the operator's ear,
measured according to EN ISO 11806 and ISO 22868,
dB(A):
Equipped with trimmer head (original)
Vibration levels
(see note 3)
Equivalent vibration levels (a
according to EN ISO 11806 and ISO 22867, m/s
Equipped with trimmer head (original), left/right
Note 1: Noise emissions in the environment measured as sound power (L
sound power level for the machine has been measured with the original cutting attachment that gives the highest level. The
difference between guaranteed and measured sound power is that the guaranteed sound power also includes dispersion in the
measurement result and the variations between different machines of the same model according to Directive 2000/14/EC.
Note 2: Reported data for equivalent sound pressure level for the machine has a typical statistical dispersion (standard deviation)
of 1 dB (A).
Note 3: Reported data for equivalent vibration level has a typical statistical dispersion (standard deviation) of 1 m/s
Approved accessories
Trimmer head
TECHNICAL DATA
dB(A)
WA
) at handles, measured
hv,eq
2
Type
Maruyama Tap-N-Go 4 inch
GT2123
22,8
32,2
28
3000
10000
10000
0,59/7000
No
No
NGK BPMR 6Y
0,6-0,7
0,55
4,2
109
111
97
5,1/5,1
) in conformity with EC directive 2000/14/EC. Reported
WA
Cutting attachment guard, Art. no.
575 68 26-01
2
.
– 19
English