Technical Data - Jonsered T2258 Li Operator's Manual

LED screen
RED LED flashes and LED 2
flashes green when the bat-
tery pack is installed.
Motor specifications
Motor type
Motor voltage
Motor power
Battery and charger specifications
Default battery pack type
Battery charger type
Noise and vibration data
Equivalent vibration level (ahv, eq) front handle.
See Note 1.
Equivalent vibration level (ahv, eq) rear handle.
See Note 1.
Sound power level, guaranteed (LWA). See Note
2.
Sound power level, measured. See Note 2.
Sound pressure level at operator's ear. See Note
3.
Product dimensions
Weight
Cutting width
Note 1: Reported data for equivalent vibration level has
a typical statistical dispersion (standard deviation) of 1.5
2
m/s .
Note 2: Noise emissions in the environment measured
as sound power (LWA) in conformity with EC directive
2000/14/ EC. Reported sound power level for the
machine has been measured with the original cutting
667 - 002 - 18.05.2018
Possible faults Possible steps
Internal battery The internal temperature in the battery must be between -15°C
temperature is too (5°F) and 70°C (158°F). The environment temperature in the
low or too high battery pack is too low or too high.
•
•

TECHNICAL DATA

unit
V (DC)
W
m/s
m/s
dB(A)
dB(A)
dB(A)
kg (lb)
cm (in)
If the battery pack is too cold from the ambient environ-
ment, move the battery pack and battery charger to a warm
environment.
If the battery pack is too hot, especially after operation,
move the battery pack and battery charger away from the
hot environment.
T2258 Li (BLT58VJN)
Brushless
58
750
140Li
440Ci
2
0.932
2
1.707
96
94.97
83.8
3.69 (8.14)
40.6 (16)
attachment that gives the highest level. The difference
between guaranteed and measured sound power is that
the guaranteed sound power also includes dispersion in
the measurement result and the variations between
different machines of the same model according to
Directive 2000/14/EC.
13