Sd-Data Viewer; Software Requirements; Installazione; Uninstallation - ABB iPAQ User Manual

9. SD-Data Viewer

This USB memory device contains "SD-DataViewer", a program that makes possible to visualize the data recorded
into the Datalogger file by the PR122/P and PR123/P trip units and downloaded by means of SD-Pocket.
"SD-DataViewer" has to be installed on the PC.

9.1 Software requirements

•
Windows XP or Windows 2000 operating system.
•
.NET Framework version 1.1 (It is supplied with the installation pack or can be downloaded from
www.microsoft.com).

9.2 Installazione

Insert USB memory device and execute SDinstaller.exe file.
The following screen is showed: select SD-DataViewer.
To install SD-DataViewer administrative rights are necessary.
Before the installation, if a previous version of SD-DataViewer is installed, it is necessary to remove it (see §
9.3).

9.3 Uninstallation

Follow the path Start/Settings/Control Panel/Add Remove Programs. From the list select SD-DataViewer and press
the "Remove" button.

9.4 Program use

To start the program, select Start/Programs/ABB/SD-DataViewer or click its icon on the desktop.
In the "File" menu select Open and then choose the file saved by SD-Pocket (*.abb extension).
The file must be transferred from the PDA to the PC in order to be visualized. On the PDA the Datalogger file is
automatically saved in C:\Program Files\ABB\SD-Pocket\Output Files\Datalogger.
ABB
ABB SACE
Figure 27. Selection of the program to be installed – SD-DataViewer
SACE SD-Pocket 1SDH000503R0002 L3104 24/25