Accupoint Precautions; Replacing The Cap - Toshiba Z10t-A User Manual

AccuPoint precautions

Certain conditions can affect the on-screen pointer when using AccuPoint.
For example, the pointer may travel contrary to AccuPoint operation or an
error message may appear, if
If an error message appears, reboot the computer. If an error message
does not appear, wait a moment for the pointer to stop, then continue
operation.

Replacing the cap

The AccuPoint cap is an expendable item that should be replaced after
prolonged use.
1.
2.
The peg is square, so be careful to align the cap's square hole with the
peg.
Stylus Pen and Reserve Pen
You can use the pen to execute actions and enter data. Hold the pen in a
natural position and tap, press or trace on the screen lightly.
User's Manual
You touch the AccuPoint during power-up.
You apply constant, soft pressure during power-up.
There is a sudden temperature change.
Strong stress is applied to the AccuPoint.
To remove the AccuPoint cap, gently dig the cap out (with finger).
Figure 4-6 Removing the AccuPoint cap
Position a new cap on the peg and press it into place.
4-6