Toshiba Z30 User Manual
  1. Manuals
  2. Brands
  3. Toshiba Manuals
  4. Laptop
  5. Z30
  6. User manual

Toshiba Z30 User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
User's Manual
Z30/Z40-B

Advertisement

Table of Contents
loading

Related Manuals for Toshiba Z30

Summary of Contents for Toshiba Z30

  • Page 1 User's Manual Z30/Z40-B...

  • Page 2: Table Of Contents

    Using your computer for the first time ..........2-3 Turning off the power ................2-10 Chapter 3 The Grand Tour The Grand Tour for Z30-B ..............3-1 The Grand Tour for Z40-B ..............3-11 Internal Hardware Components ............3-20 Power Condition Descriptions ............3-23...
  • Page 3 Special features ..................5-4 TOSHIBA Password Utility ..............5-6 TOSHIBA System Settings ..............5-8 USB Charge .................... 5-9 TOSHIBA PC Health Monitor .............. 5-12 Using the Hard Disk Drive (HDD) Protection ........5-13 TOSHIBA Setup Utility ................ 5-15 System Recovery ................5-16...

  • Page 4: Chapter 1 Toshiba Legal, Regulatory, And Safety

    © 2014 TOSHIBA Corporation. All rights reserved. Under the copyright laws, this manual cannot be reproduced in any form without the prior written permission of TOSHIBA. No patent liability is assumed, with respect to the use of the information contained herein.

  • Page 5: Regulatory Information

    ® The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Toshiba Corporation and its affiliates is under license. The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.

  • Page 6: Fcc Conditions

    Only peripherals complying with the FCC class B limits can be attached to this equipment. Operation with non-compliant peripherals or peripherals not recommended by TOSHIBA is likely to result in interference to radio and TV reception. Shielded cables must be used between the external devices and the computer’s external RGB monitor port, Universal Serial Bus (USB...

  • Page 7: Working Environment

    EMC (Electromagnetic Compatibility) and safety standards. However, TOSHIBA cannot guarantee that this product still observes these EMC standards if options or cables not produced by TOSHIBA are connected or implemented. In this case the persons who have connected/implemented those options/cables have to provide assurance that the system (PC plus options/cables) still fulfils the required standards.
  • Page 8 Note that Canadian Department of Communications (DOC) regulations provide, that changes or modifications not expressly approved by TOSHIBA Corporation could void your authority to operate this equipment. This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.
  • Page 9 Evaluation, Authorization and Restriction of Chemicals), entered into force on 1 June 2007, with phased deadlines to 2018. Toshiba will meet all REACH requirements and is committed to provide our customers with information about the presence in our articles of substances included on the candidate list according to REACH regulation.

  • Page 10: Following Information Is Only For Turkey

    Toshiba meets all requirements of Turkish regulation 28300 “Restriction of the use of certain hazardous substances in electrical and electronic equipment”.

  • Page 11: Video Standard Notice

    Video Standard Notice THIS PRODUCT IS LICENSED UNDER THE AVC, THE VC-1 AND MPEG-4 VISUAL PATENT PORTFOLIO LICENSE FOR THE PERSONAL AND NON-COMMERCIAL USE OF A CONSUMER FOR (I) ENCODING VIDEO IN COMPLIANCE WITH THE ABOVE STANDARDS ("VIDEO") AND/OR (II) DECODING AVC, VC-1 AND MPEG-4 VIDEO THAT WAS ENCODED BY A CONSUMER ENGAGED IN A PERSONAL AND NONCOMMERCIAL ACTIVITY AND/OR WAS OBTAINED FROM A VIDEO PROVIDER LICENSED BY MPEG LA TO PROVIDE SUCH...

  • Page 12: Energy Star® Program

    Disposing of the computer and the computer's battery The computer's battery pack is not user-accessible. Contact an authorized TOSHIBA service provider for details regarding how to dispose of the computer and the battery pack. General Precautions TOSHIBA computers are designed to optimize safety, minimize strain and withstand the rigors of portability.
  • Page 13 observed to further reduce the risk of personal injury or damage to the computer. Be certain to read the following general precautions and to note the cautions included in the text of the manual. Provide adequate ventilation Always make sure that your computer and AC adaptor have adequate ventilation and are protected from overheating when the power is turned on or when an AC adaptor is connected to a power outlet (even if your computer is in Sleep Mode).

  • Page 14: Cleaning The Computer

    Heat injury Avoid prolonged physical contact with the computer. If the computer is used for long periods, its surface can become very warm. While the temperature will not feel hot to the touch, if you maintain physical contact with the computer for a long time, for example if you rest the computer on your lap or if you keep your hands on the palm rest, your skin might suffer a low-heat injury.

  • Page 15: Instruction Manual For Safety And Comfort

    Make sure all disk/disc activity has ended before moving the computer. Turn off (shut down) the computer. Disconnect the AC adaptor and all peripherals before moving the computer. Close the display panel. Do not pick up the computer by its display panel. Before carrying your computer, shut it down, disconnect the AC adaptor and allow it to cool down.
  • Page 16 A caution informs you that improper use of equipment or failure to follow instructions might cause data loss, equipment damage, or might result in minor or moderate injury. Please read. A note is a hint or advice that helps you make best use of your equipment.

  • Page 17: Chapter 2 Getting Started

    This chapter provides an equipment checklist, and basic information to start using your computer. If you use an operating system that was not pre-installed by TOSHIBA, some of the features described in this manual might not function properly. Equipment checklist Carefully unpack your computer, taking care to save the box and packaging materials for future use.
  • Page 18 Click Tap the Touch Pad or click the left Touch Pad control button once. Left-click the mouse once. Tap the touch screen once (only for touch screen models). Right-click Tap the Touch Pad with two fingers together or click the right Touch Pad control button once.

  • Page 19: Short Model Name

    Model name of your computer is shortened and referred to as the following in this manual. Full Model Name Short Model Name 33.8cm PORTÉGÉ Z30-B/Z30t-B; Satellite Z30-B/Z30t-B Z30-B (13.3") 35.6cm TECRA Z40-B/Z40t-B; Satellite Z40-B/Z40t-B Z40-B (14.0") Using your computer for the first time Be sure to read the enclosed Instruction Manual for Safety and Comfort for information on the safe and proper use of this computer.

  • Page 20: Connecting The Ac Adaptor

    Always use the TOSHIBA AC adaptor that was included with your computer, or use AC adaptors specified by TOSHIBA to avoid any risk of fire or other damage to the computer. Use of an incompatible AC adaptor might cause fire or damage to the computer possibly resulting in serious injury.
  • Page 21 When you connect the AC adaptor to the computer, always follow the steps in the exact order as described in this User’s Manual. Connecting the power cable to a live electrical outlet should be the last step otherwise the adaptor DC output plug might hold an electrical charge and cause an electrical shock or minor bodily injury when touched.

  • Page 22: Opening The Display

    Figure 2-3 Connecting the DC output plug to the computer (Z30-B) Figure 2-4 Connecting the DC output plug to the computer (Z40-B) 1. DC IN 19V jack 2. DC output plug Product appearance depends on the model you purchased. Opening the display The display panel can be opened to a wide range of angles for optimal viewing.

  • Page 23: Turning On The Power

    Volume cannot be adjusted during Windows Setup. Do not touch the display screen while turning on the computer. Open the display panel. Press the power button. Figure 2-6 Turning on the power (Z30-B) User's Manual...

  • Page 24: Initial Setup

    Figure 2-7 Turning on the power (Z40-B) 1. Power button Product appearance depends on the model you purchased. Initial setup The Windows Startup Screen is the first screen displayed when you turn on the power. To install the operating system properly, follow the on-screen instructions on each screen.
  • Page 25 Charms Use the Windows charms to start apps, find documents, set up system components, and perform most other computing tasks. By pointing the mouse pointer to the upper or lower right corner of your screen, you can find a list of charms: Search, Share, Start, Devices, and Settings.

  • Page 26: Turning Off The Power

    TOSHIBA also provides advanced sign-in options, such as Fingerprint ( ) verification. For more information, refer to Utilities and Advanced Usage. Turning off the power The power can be turned off in one of the following modes, either Shut Down Mode, Sleep Mode or Hibernation Mode.

  • Page 27: Sleep Mode

    Note that keyboard keys can only be used if the Wake-up on Keyboard option is enabled within the TOSHIBA System Settings. If the computer enters Sleep Mode while a network application is active, the application might not be restored when the computer is next turned on and the system returns from Sleep Mode.

  • Page 28: Hibernation Mode

    Saves power by shutting down the system when the computer receives no input or hardware access for the time period set by the System Sleep Mode feature. Allows the use of the panel power off feature. Executing Sleep Mode You can enter Sleep Mode in one of following ways: Click the power icon ( ) on the Start screen and then select Sleep.

  • Page 29: Starting Hibernation Mode

    To prevent data loss, do not switch to Hibernation Mode while transferring data to external media, such as USB devices, memory media, or other external memory devices. Benefits of Hibernation Mode The Hibernation Mode feature provides the following benefits: Saves data to the internal storage drive when the computer automatically shuts down because of a low battery condition.
  • Page 30 After you turn off the computer, and the content of memory has been saved to the internal storage drive, turn off the power to any peripheral devices. Do not turn the computer or devices back on immediately. Wait a moment to let all capacitors fully discharge.

  • Page 31: Chapter 3 The Grand Tour

    Front with the display closed (Z30-B) The following figure shows the front of the computer with the display panel in the closed position. Figure 3-1 Front of the computer with display panel closed (Z30-B) 1. Stereo speakers 4. Internal storage drive indicator 2.
  • Page 32 For some models, the indicator blinks to indicate the connection status of the Wireless WAN/ WiMAX function. Some models are equipped with the Wireless WAN/WiMAX function. Left side (Z30-B) The following figures show the left side of the computer. User's Manual...
  • Page 33 Figure 3-2 The left side of the computer (Z30-B) 1. DC IN 19V jack 4. Universal Serial Bus (USB 3.0) port 2. External RGB monitor port 5. Headphone/Microphone jack 3. HDMI out port* 6. Smart Card slot* * Provided with some models.
  • Page 34 Some models are equipped with a Smart Card slot. Right side (Z30-B) The following figures show the right side of the computer. Figure 3-3 The right side of the computer (Z30-B) 1. Memory media slot 4. LAN jack 2. SIM card slot* 5.
  • Page 35 SIM Card slot This slot allows you insert a SIM card which enables a high-speed access to the Internet, corporate Intranet and your email while you are away from office. Refer to the Wireless WAN device section for more information. Universal Serial Bus Two Universal Serial Bus ports, which comply to (USB 3.0) port...
  • Page 36 Back (Z30-B) The following figure shows the back of the computer. Figure 3-4 The back of the computer (Z30-B) 1. Cooling vents Product appearance depends on the model you purchased. Cooling vents The cooling vents help the processor to avoid overheating.
  • Page 37 180W/120W. Some models are equipped with the docking port. Only the TOSHIBA Hi-Speed Port Replicator III 180W or 120W is compatible with the docking port. Do not attempt to use any other Port Replicator. Keep foreign objects out of the docking port. A pin or similar object can damage the circuitry of the computer.
  • Page 38 Figure 3-6 The front of the computer with the display panel open (Z30-B) 1. Wireless communication antennas 10. AccuPoint control buttons* (not shown)* 2. Microphones* 11. Touch Pad ON/OFF indicator 3. Web Camera LED* 12. TOSHIBA eco indicator 4. Web Camera* 13.
  • Page 39 Microphone The built-in microphone allows you to record sounds for your application. Refer to the Sound System and Video mode section for more information. Web Camera LED The Web Camera LED glows when the Web Camera is operating. Web Camera Web Camera is a device that allows you to record video or take photographs with your computer.
  • Page 40 Touch Pad. The indicator shows the status of the Touch Pad: Enabled: off Disabled: glows white TOSHIBA eco Double tap this indicator to launch the TOSHIBA indicator eco Utility. Touch Pad The Touch Pad located in the palm rest is used to control the movement of the on-screen pointer.

  • Page 41: The Grand Tour For Z40-B

    Power indicator The Power indicator normally glows white when the computer is turned on. However, if you turn the computer off into Sleep Mode, this indicator flashes amber. Internal storage drive The Internal storage drive indicator blinks indicator white whenever the computer is accessing the internal storage drive.
  • Page 42 Internal storage drive The Internal storage drive indicator blinks indicator white whenever the computer is accessing the internal storage drive. Wireless The Wireless communication indicator glows communication amber when the Wireless functions are turned indicator Some models are equipped with Wireless functions.
  • Page 43 External RGB monitor This port provides 15-pin, analog RGB port. port Refer to the External RGB monitor port pin assignment section for information on external RGB monitor port pin assignment. This port allows you to connect an external RGB monitor to the computer.
  • Page 44 Keep foreign metal objects, such as screws, staples and paper clips, out of the Memory media slot. Foreign metal objects can create a short circuit, which can cause damage and fire, possibly resulting in serious injury. Right side (Z40-B) The following figures show the right side of the computer. Figure 3-9 The right side of the computer (Z40-B) 1.
  • Page 45 Before removing a USB device from the USB port of your computer, click the Safely Remove Hardware and Eject Media icon on the Windows Taskbar, and then select the USB device that you want to remove. Keep foreign metal objects, such as screws, staples, and paper clips, out of the USB port.
  • Page 46 180W/120W. Some models are equipped with the docking port. Only the TOSHIBA Hi-Speed Port Replicator III 180W or 120W is compatible with the docking port. Do not attempt to use any other Port Replicator. Keep foreign objects out of the docking port. A pin or similar object can damage the circuitry of the computer.
  • Page 47 1. Wireless communication antennas 10. AccuPoint control buttons (not shown)* 2. Microphones* 11. Touch Pad ON/OFF indicator 3. Web Camera LED* 12. TOSHIBA eco indicator 4. Web Camera* 13. Touch Pad 5. Display screen 14. Touch Pad control buttons 6. Display hinges 15.
  • Page 48 Web Camera LED The Web Camera LED glows when the Web Camera is operating. Web Camera Web Camera is a device that allows you to record video or take photographs with your computer. You can use it for video chatting or video conferences using a communication tool.
  • Page 49 The indicator for some models shows the status of the Touch Pad: Enabled: off Disabled: glows white TOSHIBA eco Double tap this indicator to launch the TOSHIBA indicator eco Utility. Touch Pad The Touch Pad located in the palm rest is used to control the movement of the on-screen pointer.

  • Page 50: Internal Hardware Components

    To check which type of processor is included in your model, open the TOSHIBA PC Health Monitor utility by clicking PC Health Monitor under TOSHIBA group in the Apps view, and then click PC Information. Legal Footnote (CPU) For more information regarding CPU, refer to the Legal Footnotes section.
  • Page 51 Under certain unusual conditions of prolonged non-use and/or exposure to high temperatures, the SSD might be vulnerable to data retention errors. Legal Footnote (Internal Storage Drive Capacity) For more information regarding internal storage drive capacity, refer to the Legal Footnotes section.

  • Page 52: Intel Display Power Saving Technology

    overrides will be used automatically each time the specified programs are launched. Use the default setting for NVIDIA Optimus technology. If the program does not run normally after the setting has been changed, restore the program to the default setting. If the program does not run normally, restore the Preferred graphics processor to the default setting.

  • Page 53: Power Condition Descriptions

    Click Power and then select On Battery from the drop-down menu under Power in the upper-left corner. Click Disable under Display Power Saving Technology. Click Apply. If you want to enable this feature, click Enable under Display Power Saving Technology. Power Condition Descriptions The computer operating capability and battery charge status are affected by different power conditions, including whether an AC adaptor is...
  • Page 54 Flashing Amber Indicates that the computer is in Sleep Mode and that there is sufficient power available (AC adaptor or battery) to maintain this condition. No light Under any other conditions, the indicator does not light. User's Manual 3-24...

  • Page 55: Chapter 4 Operating Basics

    Chapter 4 Operating Basics This chapter describes the basic operations of your computer, and highlights the precautions that must be taken when using it. Using the Touch Screen Some models are equipped with a touch screen. You can use your finger to manipulate icons, buttons, menu items, the on- screen keyboard, and other items on the touch screen.

  • Page 56: Using The Touch Pad

    Swipe Quickly move your finger in from the edge of the screen, without pausing when you first touch it. Swipe from the left edge: shows your recently opened apps, and so on. Swipe from the right edge: opens or closes the charms (Search, Share, Start, Devices, Settings).

  • Page 57: The Keyboard

    Do not put items on the Touch Pad surface to prevent abnormal action. Some of the Touch Pad operations described in this section are only supported in certain applications. The Keyboard The number of keys available on your keyboard depends on which country/ region your computer is configured for, with keyboards being available for numerous languages.
  • Page 58 Function keys let you enable or disable certain features of the computer. The functions can be performed by pressing the associated function keys. Key Combination Function FN + F1 Enters ''Lock computer mode''. To restore your desktop, you need to log on again. FN + F2 Switches between the power plans.

  • Page 59: Windows Special Keys

    Those toast notifications are disabled by default. You can enable them in the TOSHIBA Function Key application. To access it, click Function Key under TOSHIBA group in the Apps view. Windows special keys The keyboard provides two keys that have special functions in Windows, the Windows logo key activates the Start screen while the application key has the same function as the secondary (right) mouse button.

  • Page 60: Replacing The Cap

    Position a new cap on the peg and press it into place. The peg is square, so be careful to align the cap’s square hole with the peg. You can buy replacement AccuPoint caps from your TOSHIBA authorized dealer. Using the Fingerprint Sensor This product has a fingerprint utility installed for the purpose of enrolling and recognizing fingerprints.

  • Page 61: Points To Note About The Fingerprint Sensor

    Fingerprint cannot be used in models that do not have a fingerprint module installed. How to Swipe your Finger Using the following steps when swiping fingers for fingerprint registration or authentication can help to minimize authentication failures: Align the first joint of the finger to the center of the sensor. Lightly touch the sensor and swipe finger levelly towards you until the sensor surface becomes visible.
  • Page 62 Do not touch the sensor with a wet finger or any wet objects. Keep the sensor surface dry and free from water vapor. Do not touch the sensor with a soiled or dirty finger as minute foreign particles of dust and dirt might scratch it. Do not paste stickers or write on the sensor.

  • Page 63: Fingerprint Utility Limitations

    TOSHIBA does not guarantee that the fingerprint utility technology will be completely secure or error-free, or that it will accurately screen out unauthorized users at all times. TOSHIBA is not liable for any failure or damage that might arise out of the use of the fingerprint software.
  • Page 64 "Do you want to quit?" is displayed. Click OK. It will be returned to the TOSHIBA Fingerprint Utility main menu. Delete all users fingerprints In the TOSHIBA Fingerprint Utility main menu, click Run as administrator. User Account Control window is displayed. Click Yes.

  • Page 65: Windows Logon Via Fingerprint Authentication

    System Authentication screen is displayed. This will switch the password input screen across to the keyboard-based one. You must ensure that you use the TOSHIBA Password Utility to register a User Password before using the Fingerprint Pre-Boot authentication and its extended function to allow fingerprints to be used to access the computer when it is turned on.

  • Page 66: Battery

    How to Enable Fingerprint Pre-Boot authentication and Single Sign-On feature It is necessary to first enroll your fingerprint with the TOSHIBA Fingerprint Utility prior to enabling and configuring the Pre-Boot authentication and Single Sign-On feature. You should check that your fingerprint is enrolled before configuring the settings.

  • Page 67: Battery Types

    Refer to the enclosed Instruction Manual for Safety and Comfort for detailed precautions and handling instructions. The battery pack can explode if not replaced, used, handled or disposed of properly. Use only batteries recommended by TOSHIBA as replacements. Charge the battery pack only in an ambient temperature from 5 through 35 degrees Celsius.

  • Page 68: Charging Time

    Charging Time Refer to User Information Guide about charging time. Charging notice The battery might not begin charging immediately under the following conditions: The battery is extremely hot or cold (if the battery is extremely hot, it might not charge at all). To ensure the battery charges to its full capacity, charge it at room temperature of between 5°C to 35°C (41 - 95°F).

  • Page 69: Maximizing Battery Operating Time

    With repeated discharges and recharges, the battery capacity will gradually decrease. In view of this, it is noted that an often used, older battery will not operate for as long as a new battery even when both are fully charged. Maximizing battery operating time The usefulness of a battery depends on how long it can supply power on a single charge, while how long the charge lasts in a battery depends on:...

  • Page 70: Wireless Wan Device

    Operate the computer on battery power for five minutes. If you find that the battery pack has at least five minutes of operating time, continue operating until the battery pack is fully discharged. However, if the DC IN/Battery indicator flashes or there is some other warning to indicate a low battery condition, go to Step 4.
  • Page 71 Gently pull to open the SIM card tray. Never pull the SIM card tray completely out of the slot. Figure 4-4 Open the SIM card tray with the eject hole (Z30-B) Figure 4-5 Open the SIM card tray with the eject hole (Z40-B) 1.

  • Page 72: Removing A Sim Card

    Figure 4-7 Installing the SIM Card (Z40-B) 1. SIM card slot 3. SIM card tray 2. SIM card Never allow metal objects, such as screws, staples and paper clips, to enter the computer. Foreign metal objects can create a short circuit, which can cause computer damage and fire, possibly resulting in serious injury.

  • Page 73: Lan

    Buildings, streets or residential areas Near to high voltage cables Bad weather, such as heavy rain or snow The computer has built-in support for Ethernet LAN (10 megabits per second, 10BASE-T), Fast Ethernet LAN (100 megabits per second, 100BASE-TX) or Gigabit Ethernet LAN (1000 megabits per second, 1000BASE-T).

  • Page 74: Memory Media

    Turn off the power to all external devices connected to the computer. Plug one end of the cable into the LAN jack. Press gently until you hear the latch click into place. Figure 4-8 Connecting the LAN cable (Z30-B) 1. LAN jack 2. LAN cable Product appearance depends on the model you purchased.
  • Page 75 Secure Digital (SD) Card microSD card adaptor and microSD card MultiMediaCard (MMC) Points to note about the memory media card SD/SDHC/SDXC memory cards comply with SDMI (Secure Digital Music Initiative), which is a technology adopted to prevent unlawful copy or playback of digital music.

  • Page 76: Media Care

    Media care Observe the following precautions when handling the card. Do not twist or bend cards. Do not expose cards to liquids or store in humid areas or lay media close to containers of liquid. Do not touch the metal part of a card or expose it to liquids or let it get dirty.

  • Page 77: Removing Memory Media

    Press the memory media gently until it clicks into place. Figure 4-10 Inserting memory media (Z30-B) 1. Memory media slot 2. Memory media Product appearance depends on the model you purchased. Make sure that the memory media is oriented properly before you insert it.

  • Page 78: Smart Card

    Smart Card A Smart Card is a credit card sized plastic card. An extremely thin integrated circuit (IC chip) is embedded into the card on which information can be recorded. These cards can be used for a wide variety of applications including telephone related and electronic monetary payments.

  • Page 79: External Display

    External RGB monitor port. However, external monitor cables which have connectors with fastening screws can still be used. Turn the external monitor's power on. Figure 4-11 Connecting the RGB cable to the External RGB monitor port (Z30-B) 1. External RGB monitor port 2. RGB cable Product appearance depends on the model you purchased.
  • Page 80 Plug the other end of the HDMI cable into the HDMI out port on your computer. Turn the HDMI display device's power on. Figure 4-12 Connecting the HDMI out port (Z30-B) 1. HDMI out port 2. HDMI cable Product appearance depends on the model you purchased.
  • Page 81 Settings for display video on HDMI To view video on the HDMI display device, be sure to configure the following settings otherwise you might find that nothing is displayed. Be sure to use the function key to select the display device before starting to play video.

  • Page 82: Toshiba Hi-Speed Port Replicator Iii 180W/120W

    TOSHIBA Hi-Speed Port Replicator III 180W/ 120W In addition to the ports available on the computer, the TOSHIBA Hi-Speed Port Replicator III 180W/120W also provides several kinds of ports. The Port Replicator connects directly to the docking interface on the underside of the computer.

  • Page 83: Security Lock

    1. Docking port (computer) Product appearance depends on the model you purchased. Make sure the AC adaptor is always connected to the TOSHIBA Hi-Speed Port Replicator III 180W/120W while in use. Otherwise the Port Replicator will stop working, possibly resulting in data loss.

  • Page 84: Optional Toshiba Accessories

    Figure 4-14 Security lock (Z30-B) 1. Security lock slot 2. Security lock Product appearance depends on the model you purchased. Optional TOSHIBA Accessories To make your computer even more powerful and convenient to use, you can add a number of options and accessories. For reference, the following...

  • Page 85: Realtek Hd Audio Manager

    Right-click on the speaker icon on the Windows Taskbar, and select Recording devices from the sub menu. Select Microphone, and click Properties. On the Levels tab, move the Microphone slider to increase or decrease the microphone volume level. If you feel the microphone volume level is inadequate, move the Microphone Boost slider to a higher level.

  • Page 86: Power Management

    When you first launch the Realtek HD Audio Manager, you can see two device tabs. Speakers is the default output device. Microphone is the default input device. To change the default device, click the Set Default Device button under the chosen device tab. Information Click the Information button to view hardware information, software...
  • Page 87 If that occurs, adjust the resolution of display, lowering it until the screen is displayed properly. User's Manual 4-33...

  • Page 88: Chapter 5 Utilities And Advanced Usage

    Multiple Displays utility allows you to configure the Display Mode, select monitors, and configure your desktop, and so on. To access this utility, click Display Utility under TOSHIBA group in the Apps view. For details on TOSHIBA Display Utility, see the help file. User's Manual...
  • Page 89 To access this utility, click System Settings under TOSHIBA group in the Apps view. TOSHIBA Setup TOSHIBA Setup Utility is a BIOS setup utility that Utility provides you a menu-based user interface so that you can easily view and change BIOS settings.
  • Page 90 TOSHIBA Service This application allows your computer to Station automatically search for TOSHIBA software updates or other alerts from TOSHIBA that are specific to your computer system and its programs. When enabled, this application periodically transmits to our servers a limited...

  • Page 91: Special Features

    Special features The following features are either unique to TOSHIBA computers or are advanced features which make the computer more convenient to use. Access each function using the following procedures. To access the Power Options, click Control Panel -> System and Security ->...
  • Page 92 Low battery When battery power is exhausted to the point automatic Hibernation that computer operation cannot be continued, the system automatically enters Hibernation Mode Mode and shuts itself down. This can be specified in the Power Options. Sleep Mode If you have to interrupt your work, you can use this feature to allow you to turn off power to the computer without exiting from your software.

  • Page 93: Toshiba Password Utility

    Passwords set by the TOSHIBA Password Utility function are different from the Windows password. User Password To start the utility, click Password Utility under TOSHIBA group in the Apps view, and click User Password. User authentication might be required to validate user rights when using TOSHIBA Password Utility to delete or change passwords, and so on.

  • Page 94: Supervisor Password

    Apply or OK. When the computer is started, this text is displayed together with the prompt asking you to enter a password. You can launch TOSHIBA Setup Utility to set, change or delete the HDD/ SSD Password or HDD/SSD Master Password.

  • Page 95: Toshiba System Settings

    To run TOSHIBA System Settings, click System Settings under TOSHIBA group in the Apps view. The TOSHIBA System Settings window contains a number of tabs to allow specific functions of the computer to be configured. In addition there are also three buttons: OK, Cancel and Apply.

  • Page 96: Usb Charge

    Some options shown in gray are possible to confirm their status. TOSHIBA System Settings screen might have the following tabs: General—Allows you to view the current BIOS version or change certain settings back to their default values Sleep and Charge/Sleep Utilities—Allows you to set advanced features for sleep mode, hibernate mode, and shutdown state Display—Allows you to select the internal LCD and/or external monitor...
  • Page 97 Move the slider to enable or disable the Sleep and Charge function. The Sleep and Charge function might not work with certain external devices even if they are compliant with the USB specification. In those cases, turn the power of the computer ON to charge the device. When Sleep and Charge function is enabled, USB bus power (DC5V) is supplied to compatible ports even when the power of the computer is turned OFF.

  • Page 98: System On Cdp Charge

    Charge Mode" is enabled, your computer can supply USB bus power (DC5V, 1.5A) to the compatible ports while the computer is turned on. To set System ON CDP Charge Mode, click System Settings -> USB under TOSHIBA group in the Apps view. Enabled Rapid USB battery charge at maximum 1.5A while PC is powered On.

  • Page 99: Toshiba Pc Health Monitor

    You can disable the TOSHIBA PC Health Monitor at any time by uninstalling the software via Uninstall a program in the Control Panel.

  • Page 100: Starting The Toshiba Pc Health Monitor

    TOSHIBA standard limited warranty terms and limitations apply. Starting the TOSHIBA PC Health Monitor The TOSHIBA PC Health Monitor can be opened by clicking PC Health Monitor under TOSHIBA group in the Apps view. The TOSHIBA PC Health Monitor main screen is displayed.

  • Page 101: Hdd Protection

    You can change HDD Protection settings. To open the utility, click System Settings -> HDD Protection under TOSHIBA group in the Apps view. The utility can also be started from the icon in the Taskbar or from the Control Panel.

  • Page 102: Toshiba Setup Utility

    Intensely shaking the computer or other subjecting it to strong impacts might damage the computer. TOSHIBA Setup Utility TOSHIBA Setup Utility is a BIOS setup utility that provides you a menu- based user interface so that you can easily view and change BIOS settings.

  • Page 103: System Recovery

    To save the changes and exit the utility, press the F10 key and proceed by selecting Yes or select Exit -> Exit Saving Changes -> Yes. The computer restarts immediately. System Recovery There is a hidden partition allocated on the internal storage drive for the System Recovery Options in the event of a problem.
  • Page 104 When you reinstall the Windows operating system, the internal storage drive will be reformatted and all data will be lost. Make sure to use the default Boot Mode option in TOSHIBA Setup Utility before restoring. Click the power icon ( ) on the Start screen, and select Restart.

  • Page 105: Recovery Partition

    Recovery Media. However, if you have already created a "Recovery Media", you can use it to restore the recovery partition. If you have not created "Recovery Media", contact TOSHIBA support for assistance. Restoring the pre-installed software from the Recovery Partition A portion of the total internal storage drive space is configured as a hidden recovery partition.
  • Page 106 Click Update and recovery under PC settings and then click Recovery. Click Get started under Remove everything and reinstall Windows. Follow the on-screen instructions to finish the recovery. User's Manual 5-19...

  • Page 107: Troubleshooting

    In reality many problems can be solved simply, but a few might require help from TOSHIBA Support. If you find you need to consult others, be prepared to describe the problem in as much detail as possible.

  • Page 108: Analyzing The Problem

    Always try to make detailed notes of your observations and keep them in a permanent error log - this helps you to describe your problems to TOSHIBA Support. In addition, if a problem recurs, the log you have made helps to identify the problem faster.

  • Page 109: If Something Goes Wrong

    Before using a peripheral device or application software that is not an authorized TOSHIBA part or product, make sure that the device or software can be used with your computer. Use of incompatible devices might cause injury or might damage your computer.

  • Page 110: Hardware And System Checklist

    By holding down one of the following keys during startup, your computer can load the following advanced options. Advanced option TOSHIBA Setup Utility Boot menu 0 (zero) Recovery options If your computer starts to load the Operating System instead of desired...

  • Page 111: Overheating Power Down

    If the computer has reached room temperature and it still does not start, or if it starts but shuts down quickly, contact TOSHIBA Support. AC power If you have trouble turning on the computer with the AC adaptor connected, check the status of the DC IN/Battery indicator.

  • Page 112: Internal Display Panel

    The lasting time of the Real-Time Clock (RTC) has and system date/ run out. You must set the date and time in the time are lost. TOSHIBA Setup Utility by using the following steps: Launch the TOSHIBA Setup Utility. Refer to the...

  • Page 113: Memory Media Card

    As a last resort, you should reformat the HDD and then reload the operating system and all other files and data. If you are still unable to resolve the problem, contact TOSHIBA Support. Memory Media Card For further information, refer to Operating Basics.

  • Page 114: Pointing Device

    If you are still unable to resolve the problem, contact TOSHIBA Support. Pointing device If you are using a USB mouse, you should also refer to both the mouse section and the documentation supplied with your mouse.

  • Page 115: Usb Mouse

    Hardware and Sound -> Mouse under Windows sensitive enough. System group in the Apps view. If you are still unable to resolve the problem, contact TOSHIBA Support. USB mouse Problem Procedure On-screen pointer In this instance, the system might be busy. Try...

  • Page 116: Usb Device

    If you are still unable to resolve the problem, contact TOSHIBA Support. USB device In addition to the information in this section, also refer to the documentation supplied with your USB device.
  • Page 117 Sleep and Charge Enable the Sleep and Charge function in the function. TOSHIBA System Settings. When there is a current overflow of the external device connected to the compatible port, USB bus power (DC5V) supply might be stopped for safety reasons.

  • Page 118: Sound System

    Volume cannot be adjusted during Windows start up or shut down. If you are still unable to resolve the problem, contact TOSHIBA Support. External monitor Also refer to Operating Basics, and to the documentation supplied with your monitor for further information.
  • Page 119 Display error occurs Check that the cable connecting the external monitor to the computer is firmly attached. If you are still unable to resolve the problem, contact TOSHIBA Support. Problem Procedure Cannot access LAN Check for a firm cable connection between the LAN jack and the LAN hub.

  • Page 120: Wireless Lan

    Bluetooth device is turned Check to ensure that no optional Bluetooth Adaptor is installed in the computer. The built-in Bluetooth hardware cannot operate simultaneously with another Bluetooth controller. If you are still unable to resolve the problem, contact TOSHIBA Support. User's Manual 6-14...

  • Page 121: Toshiba Support

    TOSHIBA support If you require any additional help using your computer or if you are having problems operating the computer, you might need to contact TOSHIBA for additional technical assistance. Before you call Some problems you experience might be related to software or the operating system so it is important that you investigate other sources of assistance first.

  • Page 122: Appendix Specifications

    The following physical dimensions do not include parts that extend beyond the main body. The physical dimensions might vary depending on the model you purchased. Z30-B 316 (w) x 227 (d) x 13.9/17.9 (h) millimeters 316 (w) x 227 (d) x 15.9/19.9 (h) millimeters (touch screen models) Z40-B 338 (w) x 236 (d) x 20.4 (h) millimeters...

  • Page 123: Power Requirements

    Power Requirements AC adaptor 100-240V AC 50 Hz or 60 Hz (cycles per second) Computer 19 V DC External RGB monitor port pin assignment Signal Name Description Red Video Signal Green Video Signal Blue Video Signal Reserved Reserved Ground Ground Ground Ground Power Supply...

  • Page 124: Ac Power Cord And Connectors

    AC Power Cord and Connectors The AC input plug of the power cord must be compatible with the various international AC power outlets and the cord must meet the standards for the country/region in which it is used. All cords must meet the following specifications: Wire size: Minimum 0.75 mm...

  • Page 125: Information For Wireless Devices

    United Kingdom UL approved BS approved Australia Europe AS approved Approved by the appropriate agency Canada China CSA approved CCC approved Information for Wireless Devices Wireless Technology Interoperability The Wireless LAN is compatible with other LAN systems Direct Sequence Spread Spectrum (DSSS) /Orthogonal Frequency Division Multiplexing (OFDM) radio technology, and is compliant to: The IEEE 802.11 Standard on Wireless LANs (Revision a/b/g/n, b/g/n or Revision a/b/g/n/ac), as defined and approved by the Institute of...

  • Page 126: Wireless Devices And Your Health

    Because wireless products operate within the guidelines found in radio frequency safety standards and recommendations, TOSHIBA believes that wireless products are safe for use by consumers. These standards and recommendations reflect the consensus of the scientific community and result from deliberations of panels and committees of scientists who continually review and interpret the extensive research literature.

  • Page 127: Card Specifications

    If this occurs, the outsider might illegally access your system, eavesdrop, or cause the loss or destruction of stored data. TOSHIBA is not liable for the loss of data due to eavesdropping or illegal access through the wireless LAN and the damage thereof. Card Specifications Compatibility IEEE 802.11 Standard for Wireless LANs...

  • Page 128: Bluetooth Wireless Technology

    Radio Frequency Band 5 GHz (5150-5850 MHz) (Revision a and n) Band 2.4 GHz (2400-2483.5 MHz) (Revision b/g and n) The range of the wireless signal is related to the transmit rate of the wireless communication. Communications at lower transmit range might travel larger distances.

  • Page 129: Radio Links

    Radio links You can easily establish links between two or more devices, with these links being maintained even if the devices are not within a line-of-sight of each other. Radio Regulatory Information The Wireless device must be installed and used in strict accordance with the manufacturer’s instructions as described in the user documentation that comes with the product.
  • Page 130 Russian Limited e.i.r.p 100mW. Permitted to use Federation: only for indoor applications, closed industrial and warehouse areas, and on board aircraft. Permitted to use for local networks of aircraft crew service communications on board aircraft in area of the airport and at all stages of flight.
  • Page 131 check the current channel of operation. If operation is occurring outside of the allowable frequencies for outdoor use, as listed above, the user must contact the applicable national spectrum regulator to request a license for outdoor operation. Canada - Industry Canada (IC) This device complies with RSS-210 of the Industry Canada Rules.
  • Page 132 Canada limits for the general population; consult Safety Code 6, obtainable from Health Canada’s website www.hc-sc.gc.ca Caution: Exposure to Radio Frequency Radiation The radiated output power of the Wireless device is far below the FCC radio frequency exposure limits. Nevertheless, the Wireless device shall be used in such a manner that the potential for human contact during normal operation is minimized.
  • Page 133 If this equipment causes RF interference to other radio stations, promptly change the frequency being used, change the location of use, or turn off the source of emissions. Contact an authorized TOSHIBA service provider if you have problems with interference caused by this product to Other Radio Stations.

  • Page 134: Device Authorization

    (1) (2) (3) 2.4: This equipment uses a frequency of 2.4 GHz. FH: This equipment uses FH-SS modulation. 1: The interference range of this equipment is less than 10m. : This equipment uses a frequency bandwidth from 2,400 MHz to 2,483.5 MHz. It is impossible to avoid the band of mobile object identification systems.

  • Page 135: Radio Approvals For Wireless Devices

    This equipment is approved to the radio standard by the countries/regions in the following table. If you use this equipment in the countries/regions which are not listed in the following table, contact TOSHIBA Support. As of December 2014 Austria Belgium...
  • Page 136 On the BIOS setup utility screen, change AMT Setup Prompt to Enabled. Press the F10 key, and press Y key to save the settings. When the computer restarts, the message “Press < Ctrl - P > to enter Intel(R) ME Setup” appears. Press CTRL + P to enter the MEBx Setup. To disable the AMT function, do the following: Select MEBx Login, and enter the default password “admin”...
  • Page 137 Select MEBx Exit, and press Y key. When the computer restarts, go to BIOS setup utility. On the BIOS setup utility screen, change AMT Setup Prompt to Disabled. Press the F10 key to save the settings, and press the Y key. When using the computer with the AC adaptor connected and the AMT function set to enabled, power might still be supplied to the system memory even when the computer power is turned off, or the...

  • Page 138: Legal Footnotes

    For optimum performance, use your computer product only under recommended conditions. Read additional restrictions in your product documentation. Contact TOSHIBA technical service and support, refer to TOSHIBA support section for more information.

  • Page 139: Battery Life

    Published battery life numbers are achieved on select models and configurations tested by TOSHIBA at the time of publication. Recharge time varies depending on usage. Battery might not charge while computer is consuming full power.

  • Page 140: Copy Protection

    Over a period of time, and depending on the usage of the computer, the brightness of the LCD screen will deteriorate. This is an intrinsic characteristic of LCD technology. Maximum brightness is only available when operating in AC power mode. Screen dims when the computer is operated on battery power and you might not be able to increase the brightness of the screen.
  • Page 141 The OpenSSL toolkit stays under a dual license, i.e. both the conditions of the OpenSSL License and the original SSLeay license apply to the toolkit. See below for the actual license texts. Actually both licenses are BSD-style Open Source licenses. In case of any license issues related to OpenSSL please contact openssl-core@openssl.org.
  • Page 142 OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ===================================================== This product includes cryptographic software written by Eric Young (eay@cryptsoft.com). This product includes software written by Tim Hudson (tjh@cryptsoft.com). Original SSLeay License ---------------------------------- /* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com) All rights reserved.

  • Page 143: Freetype License Issues

    If you include any Windows specific code (or a derivative thereof) from the apps directory (application code) you must include an acknowledgement: "This product includes software written by Tim Hudson (tjh@cryptsoft.com)" THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
  • Page 144 We dont promise that this software works. However, we will be interested in any kind of bug reports. (`as is` distribution) You can use this software for whatever you want, in parts or full form, without having to pay us. (`royalty-free` usage) You may not pretend that you wrote this software.
  • Page 145 -------------- THE FREETYPE PROJECT IS PROVIDED `AS IS` WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT WILL ANY OF THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY DAMAGES CAUSED BY THE USE OR THE INABILITY TO USE, OF THE FREETYPE PROJECT.
  • Page 146 -------------- There are two mailing lists related to FreeType: freetype@nongnu.org Discusses general use and applications of FreeType, as well as future and wanted additions to the library and distribution. If you are looking for support, start in this list if you haven`t found anything to help you in the documentation.

  • Page 147: Index

    Index AC adaptor Equipment checklist 2-1 additional 4-30 External monitor connecting 2-4 problems 6-13 DC IN 19V jack 3-3, 3-15 Graphics Processing Unit Battery 3-21 extending life 4-15 monitoring capacity 4-14 save mode 5-4 types 4-13 Hard disk drive automatic power off 5-4 Bluetooth 7-7 Cleaning the computer 1-11 Keyboard...
  • Page 148 6-12 HDD 6-7 Internal display panel 6-6 Keyboard 6-6 Memory Media Card 6-7 Overheating power Touch Pad 3-10, 3-19, 4-2, down 6-5 Power 6-4 Real Time Clock 6-6 Touch Screen 4-1 Sound system 6-12 TOSHIBA support 6-15 User's Manual Index-2...
  • Page 149 USB device problems 6-10 Video mode 4-32 Video RAM 3-21 Web Camera 3-9, 3-18 Wireless communication 7-5 User's Manual Index-3...

This manual is also suitable for:

Z40-bZ30-b

Table of Contents