Toshiba portege z20t-b User Manual
  1. Manuals
  2. Brands
  3. Toshiba Manuals
  4. Laptop
  5. PORTEGE Z20t-B Series
  6. User manual

Toshiba portege z20t-b User Manual

Hide thumbs Also See for portege z20t-b:
Table of Contents

Advertisement

Quick Links

See also: User Manual
User's Manual
PORTÉGÉ Z20t-B
PORTÉGÉ WT20-B

Advertisement

Table of Contents
loading

Related Manuals for Toshiba portege z20t-b

Summary of Contents for Toshiba portege z20t-b

  • Page 1 User's Manual PORTÉGÉ Z20t-B PORTÉGÉ WT20-B...

  • Page 2: Table Of Contents

    Table of Contents Chapter 1 TOSHIBA Legal, Regulatory, and Safety Copyright, Disclaimer and Trademarks ..........1-1 Regulatory Information ................. 1-2 Video Standard Notice ................1-8 ENERGY STAR® Program ..............1-9 Disposing of the computer and the computer's battery ....1-9 General Precautions ................
  • Page 3 Utilities and Applications ..............5-1 Special features ..................5-5 TOSHIBA Password Utility ..............5-7 TOSHIBA System Settings ..............5-9 TOSHIBA Tablet Access Code Logon Utility ........5-10 TOSHIBA PC Health Monitor .............. 5-11 TOSHIBA Setup Utility ................ 5-12 Chapter 6 Troubleshooting Problem-solving process ..............

  • Page 4: Chapter 1 Toshiba Legal, Regulatory, And Safety

    © 2015 TOSHIBA Corporation. All rights reserved. Under the copyright laws, this manual cannot be reproduced in any form without the prior written permission of TOSHIBA. No patent liability is assumed, with respect to the use of the information contained herein.

  • Page 5: Regulatory Information

    ® The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Toshiba Corporation and its affiliates is under license. The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.

  • Page 6: Fcc Conditions

    Only peripherals complying with the FCC class B limits might be attached to this equipment. Operation with non-compliant peripherals or peripherals not recommended by TOSHIBA is likely to result in interference to radio and TV reception. Shielded cables must be used between the external devices and the computer’s Micro-USB (USB 2.0) port, HDMI Micro port,...

  • Page 7: Working Environment

    EMC (Electromagnetic Compatibility) and safety standards. However, TOSHIBA cannot guarantee that this product still observes these EMC standards if options or cables not produced by TOSHIBA are connected or implemented. In this case the persons who have connected/implemented those options/cables have to provide assurance that the system (PC plus options/cables) still fulfils the required standards.
  • Page 8 Note that Canadian Department of Communications (DOC) regulations provide, that changes or modifications not expressly approved by TOSHIBA Corporation could void your authority to operate this equipment. This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.
  • Page 9 Evaluation, Authorization and Restriction of Chemicals), entered into force on 1 June 2007, with phased deadlines to 2018. Toshiba will meet all REACH requirements and is committed to provide our customers with information about the presence in our articles of substances included on the candidate list according to REACH regulation.

  • Page 10: Following Information Is Only For Turkey

    Toshiba meets all requirements of Turkish regulation 28300 “Restriction of the use of certain hazardous substances in electrical and electronic equipment”.

  • Page 11: Video Standard Notice

    Video Standard Notice THIS PRODUCT IS LICENSED UNDER THE AVC, THE VC-1 AND MPEG-4 VISUAL PATENT PORTFOLIO LICENSE FOR THE PERSONAL AND NON-COMMERCIAL USE OF A CONSUMER FOR (I) ENCODING VIDEO IN COMPLIANCE WITH THE ABOVE STANDARDS ("VIDEO") AND/OR (II) DECODING AVC, VC-1 AND MPEG-4 VIDEO THAT WAS ENCODED BY A CONSUMER ENGAGED IN A PERSONAL AND NONCOMMERCIAL ACTIVITY AND/OR WAS OBTAINED FROM A VIDEO PROVIDER LICENSED BY MPEG LA TO PROVIDE SUCH...

  • Page 12: Energy Star® Program

    Disposing of the computer and the computer's battery The computer's battery pack is not user-accessible. Contact an authorized TOSHIBA service provider for details regarding how to dispose of the computer and the battery pack. General Precautions TOSHIBA computers are designed to optimize safety, minimize strain, and withstand the rigors of portability.
  • Page 13 observed to further reduce the risk of personal injury or damage to the computer. Be certain to read the following general precautions and to note the cautions included in the text of the manual. Provide adequate ventilation Always make sure that your computer and AC adaptor have adequate ventilation and are protected from overheating when the power is turned on or when an AC adaptor is connected to a power outlet (even if your computer is in Sleep Mode).

  • Page 14: Cleaning The Computer

    Heat injury Avoid prolonged physical contact with the computer. If the computer is used for long periods, its surface can become very warm. While the temperature will not feel hot to the touch, if you maintain physical contact with the computer for a long time, for example if you rest the computer on your lap or if you keep your hands on the palm rest, your skin might suffer a low-heat injury.

  • Page 15: Safety Icons

    Turn off (shut down) the computer. Disconnect the AC adaptor and all peripherals before moving the computer (TOSHIBA Keyboard Dock, however, can remain connected). Close the computer when the tablet computer is docked. Do not pick up the computer by its display panel when using in laptop or presentation mode.
  • Page 16 A caution informs you that improper use of equipment or failure to follow instructions might cause data loss, equipment damage, or might result in minor or moderate injury. Please read. A note is a hint or advice that helps you make best use of your equipment.

  • Page 17: Chapter 2 Getting Started

    This chapter provides an equipment checklist, and basic information to start using your computer. If you use an operating system that was not pre-installed by TOSHIBA, some of the features described in this manual might not function properly. Equipment checklist Carefully unpack your computer, taking care to save the box and packaging materials for future use.

  • Page 18: Operating Mode

    Figure 2-1 The main unit: tablet computer Figure 2-2 The accessory unit: TOSHIBA Keyboard Dock Product appearance depends on the model you purchased. For availability of TOSHIBA Keyboard Dock, refer to the following table: Model Name TOSHIBA Keyboard Dock PORTÉGÉ Z20t-B...

  • Page 19: Short Model Name

    Mode Name Illustration Definition Laptop mode Suitable for tasks that frequently require the keyboard, such as typing. Presentation Suitable for tasks that mode rarely require touch interactions, such as a presentation and a slide show. Tablet mode Suitable for tasks that require both touch interactions and mobility, such as reading.

  • Page 20: Using Your Computer For The First Time

    Click Tap the Touch Pad or click the left Touch Pad control button once (for Z20t-B). Left-click the mouse once. Tap the touch screen once. Right-click Tap the Touch Pad with two fingers together or click the right Touch Pad control button once (for Z20t-B).
  • Page 21 It is a good idea to back up the internal storage or other main storage device to external media periodically. General storage media is not durable or stable over long periods of time and under certain conditions might result in data loss. Before you install a device or application, save any data in memory to the internal storage or other storage media.
  • Page 22 Gently press down the tablet computer until it clicks into place. The hooks on the keyboard dock engage the tablet computer, and the release latch goes back to the lock position. Figure 2-4 Docking the tablet computer 1. Guide pins 3.
  • Page 23 Check the security lock switch on left side of the keyboard dock, and slide it to the unlocked position. Figure 2-6 Slide the security lock switch Turn the tablet computer around to let its backside face you. Hold both sides of the tablet computer, and align the guide pins on the keyboard dock with the guide pin grooves on the bottom of the tablet computer.

  • Page 24: Notes On Use

    Slowly fold the tablet computer down to an optimal viewing angle for presentation mode or fold down flat for tablet mode. Figure 2-8 Folding the tablet computer Notes on use Open and close the computer with reasonable care. Opening it vigorously or slamming it shut might cause damage.
  • Page 25 Do not close the computer with pens or any other objects left in between the tablet computer and the keyboard dock. Never turn the hinges without the tablet computer docked, otherwise it might cause damage or possibly result in mechanical malfunction. Do not press or push with excess force on the display screen, otherwise the computer might become unsteady and possibly fall over.

  • Page 26: Connecting The Ac Adaptor

    Check the security lock switch on the left side of the keyboard dock, and slide it to the unlocked position. Figure 2-9 Slide the security lock switch Turn the tablet computer to an upright position. Slide the release latch to the unlocked position (a), and slowly lift the tablet computer to remove it while holding down the keyboard dock (b).
  • Page 27 Always use the TOSHIBA AC adaptor that was included with your computer, or use AC adaptors specified by TOSHIBA to avoid any risk of fire or other damage to the computer. Use of an incompatible AC adaptor might cause fire or damage to the computer possibly resulting in serious injury.
  • Page 28 Figure 2-12 Connecting the power cord to the AC adaptor (3-pin plug) Either a 2-pin or 3-pin adaptor/cord is included with the computer depending on the model. Connect the DC output plug of the AC adaptor to the DC IN 19V jack. Figure 2-13 Connecting the DC output plug to the tablet computer Figure 2-14 Connecting the DC output plug to the keyboard dock 1.

  • Page 29: Getting To Know Windows

    Turning on the power Press the Power button to turn on the power, and the Power indicator indicates the status. Refer to the Power Condition Descriptions section for more information. Figure 2-15 Turning on the power 1. Power button After you turn on the power for the first time, do not turn it off until you have set up the operating system.
  • Page 30 You can access the Start menu from an app or the desktop in the following ways: Click the Start button ( ) in the lower-left corner of the screen. ® Press the Windows logo key ( ) on your keyboard. Most used allows quick access to your frequently used apps, and your recently installed apps are highlighted under Recently added.

  • Page 31: Turning Off The Power

    Settings Settings provides system settings including advanced settings in the Control Panel. They are divided in categories so that you can configure, optimize, or personalize Windows. You can also type in the keyword, and use Search to find any setting. To open Settings, click Start ->...

  • Page 32: Restarting The Computer

    Make sure all disk/disc activity has stopped before removing the disk/ disc. If you turn off the power while a disk (disc) is being accessed, you might lose data or damage the disk. Never turn off the power while an application is running. Failure to do so can cause data loss.
  • Page 33 Note that keyboard keys can only be used if the Wake-up on Keyboard option is enabled within the TOSHIBA System Settings. If the computer enters Sleep Mode while a network application is active, the application might not be restored when the computer is next turned on and the system returns from Sleep Mode.

  • Page 34: Hibernation Mode

    If you are operating the computer on battery power, you can lengthen the overall operating time by turning it off into Hibernation Mode. Sleep Mode consumes more power while the computer is off. Sleep Mode limitations Sleep Mode will not function under the following conditions: Power is turned back on immediately after shutting down.

  • Page 35: System Recovery

    Restoring the pre-installed software from your created Recovery Media Restoring the pre-installed software from the Recovery internal storage If you choose TOSHIBA Maintenance Utility to erase the internal storage, all data including the operating system and recovery partition will be User's Manual 2-19...

  • Page 36: Creating Recovery Media

    In that case, you cannot create recovery media or restore the pre- installed software from the recovery partition. Make sure that you have already created recovery media before you start TOSHIBA Maintenance Utility. This recovery media can be used to restore your system after you have erased your internal storage.
  • Page 37 (only for Z20t-B). When you reinstall the Windows operating system, the internal storage will be reformatted and all data will be lost. Make sure to use the default Boot Mode option in TOSHIBA Setup Utility before restoring. Launch the TOSHIBA Setup Utility.

  • Page 38: Recovery Partition

    "Recovery Media", the "Recovery Media" cannot be created. However, if you have already created a "Recovery Media", you can use it to restore the recovery partition. If you have not created "Recovery Media", contact TOSHIBA support for assistance. Restoring the pre-installed software from the...
  • Page 39 Without the keyboard dock, you can hold down the Volume up button until the Boot menu is loaded, and then select HDD Recovery. Choose Yes if you want to continue. Select Troubleshoot -> TOSHIBA Maintenance Utility -> TOSHIBA HDD Recovery. Follow the on-screen instructions to finish the recovery.

  • Page 40: Chapter 3 The Grand Tour

    Chapter 3 The Grand Tour This chapter identifies the various components of the computer. It is recommended that you become familiar with each before you operate the computer. Legal Footnote (Non-applicable Icons) For more information regarding Non-applicable Icons, refer to the Legal Footnotes section.
  • Page 41 Figure 3-1 Tablet computer 1. Web Camera (front) 15. HDMI Micro port 2. Web Camera LED (front) 16. Memory media slot 3. Ambient light sensor 17. Headphone/Microphone combo jack 4. Microphones 18. Reserve Pen slot* 5. Display screen 19. Reserve Pen* 6.
  • Page 42 Do not point the web camera directly at the sun. Do not touch or press strongly on the web camera lens. Failure to do so might reduce image quality. Use an eyeglass cleaner (cleaner cloth) or other soft cloth to clean the lens if it becomes dirty. Web Camera LED The Web Camera LED glows when the Web (front)
  • Page 43 SIM Card slot This slot allows you insert a SIM card which enables a high-speed access to the Internet, corporate Intranet and your email while you are away from office. Refer to the Wireless WAN device section for more information. Power button Press this button to turn the computer's power on or off.
  • Page 44 Be careful when you connect and use chunky USB devices, the tablet computer might be lifted. Any possible stress put on the body of the tablet computer might cause damage. Keep foreign metal objects, such as screws, staples, and paper clips, out of the Micro-USB port.
  • Page 45 Reserve Pen A Reserve Pen is stored in the tablet computer and enables direct data entry through the display screen. Some models are provided with a Reserve Pen. Refer to the Stylus Pen and Reserve Pen section for more information. Make sure that the Reserve Pen is fully inserted into the Reserve Pen slot before docking the tablet computer.

  • Page 46: Toshiba Keyboard Dock

    To use the Touch Pad, simply touch and move your fingertip across it in the direction you want the on-screen pointer to go. Touch Pad ON/OFF Double tap to enable/disable the Touch Pad. icon TOSHIBA eco icon Double tap to enable/disable TOSHIBA eco Utility. User's Manual...

  • Page 47: Left Side

    Touch Pad control Touch Pad control buttons are used like the buttons buttons on a standard mouse. Click the left button to select a menu item or to manipulate text or graphics designated by the pointer, and click the right button to display a menu or other function depending on the software you are using.

  • Page 48: Right Side

    Security lock slot A security cable can be attached to this slot and then connected to a desk or other large object in order to deter theft of the computer. Security lock switch When this switch is in the locked position ( the release latch cannot be slided.
  • Page 49 Note that it is not possible to confirm the operation of all functions of all USB devices that are available. Some functions associated with a specific device might not operate properly. Before removing a USB device from the USB port of your computer, click the Safely Remove Hardware and Eject Media icon on the Windows taskbar, and then select the USB device that you want to remove.

  • Page 50: Internal Hardware Components

    Underside The following figures show the underside of the keyboard dock. Figure 3-5 The underside of the keyboard dock 1. Reset button Product appearance depends on the model you purchased. Reset button If your keyboard dock is equipped with a battery pack, and is not working correctly, such as when the keyboard or the Touch Pad does not respond to your command, do the following:...
  • Page 51 The capacity of the hard disk drive varies depending on the model. To check which type of internal storage is included in your model, open the TOSHIBA PC Health Monitor utility by clicking PC Health Monitor under TOSHIBA group in All apps, and then click PC Information.
  • Page 52 Legal Footnote (Internal Storage Capacity) For more information regarding Internal Storage Capacity, refer to the Legal Footnotes section. Video RAM The memory in the graphics adaptor of the computer, used to store the image displayed on a bitmap display. The amount of Video RAM available depends on the system memory of the computer.

  • Page 53: Power Condition Descriptions

    Click Apply. If you want to enable this feature, click Enable under Display Power Saving Technology. Power Condition Descriptions The computer operating capability and battery charge status are affected by different power conditions, including whether an AC adaptor is connected and what the battery charge level is. Battery indicator Check the Battery indicator to determine the status of the battery pack inside the tablet computer and the power status with the AC adaptor...

  • Page 54: Power Indicator

    No light Under any other conditions, the indicator does not light. If the battery pack becomes too hot while it is being charged, the charge stops and the indicator goes out. When the temperature of the battery pack falls to a normal range, charging will resume. This process occurs regardless of whether the computer's power is on or off.

  • Page 55: Chapter 4 Operating Basics

    Chapter 4 Operating Basics This chapter describes the basic operations of your computer, and highlights the precautions that must be taken when using it. Operating in tablet mode (also for WT20-B) Observe the following instructions when you operate the computer in tablet mode.

  • Page 56: Changing The Screen Orientation

    The display screen of some models is a touch sensitive, digitizer screen, and works with a stylus pen. However, the outer edges of the screen might be less sensitive. Keep the Stylus Pen or the Reserve Pen inside the display area when you use it near the edges of the display screen.

  • Page 57: Using The Touch Screen

    Avoid having direct contact with the other edges of the hand held device while the wireless device is turned on and transmitting. Only factories installed wireless transmitter can be used with this hand held device to satisfy RF exposure compliance. Some drivers/utilities might not perform install and uninstall operation when the screen orientation is changed to portrait mode.
  • Page 58 Simply tap your finger once on the touch screen to activate an item, such as an app. Press and hold Press your finger down and leave it there for a few seconds. This shows information to help you learn more about an item or opens a menu specific to what you are doing.

  • Page 59: Using The Touch Pad

    Do not put items on the Touch Pad surface to prevent abnormal action. Some of the Touch Pad operations described in this section are only supported in certain applications. TOSHIBA Pointing Device AccuPoint To use the AccuPoint, simply push it with your finger tip in the direction you want to move the on-screen pointer.

  • Page 60: Accupoint Precautions

    Figure 4-5 AccuPoint 1. AccuPoint 3. AccuPoint right control button 2. AccuPoint left control button AccuPoint precautions Certain conditions can affect the on-screen pointer when using AccuPoint. For example, the pointer might travel contrary to AccuPoint operation or an error message might appear, if You touch the AccuPoint during power-up.
  • Page 61 Position a new cap on the peg and press it into place. The peg is square, so be careful to align the cap’s square hole with the peg. You can buy replacement AccuPoint caps from your TOSHIBA authorized dealer. Stylus Pen and Reserve Pen You can use the pen to execute actions and enter data.
  • Page 62 Pen button Press and hold this button and touch the tip of the pen on an object. Immediately lift it to display a pop-up menu or execute a specific action. It functions as right clicking the mouse once. Eraser The virtual eraser allows you to delete notes or sketches in applications that support eraser function.

  • Page 63: Removing The Reserve Pen

    It is recommended that you keep another pen set as a spare. You can buy replacement pen sets from your TOSHIBA authorized dealer. TOSHIBA is not liable for any problems arising on the products due to the use of the pen in an environment where the above conditions are not satisfied or because of its use by unspecified number of users.

  • Page 64: Pen Actions

    Figure 4-10 Inserting the Reserve Pen 1. Reserve Pen slot 2. Reserve Pen Make sure that the Reserve Pen is fully inserted into the Reserve Pen slot before docking the tablet computer. Pen actions You can use the Stylus Pen or the Reserve Pen to enter data, start programs, move objects and execute other actions.

  • Page 65: The Keyboard

    When the pen tip breaks replace it with one of the refills delivered with the Stylus Pen. When these refills have run out, you can purchase a new pen set from a TOSHIBA authorized dealer. A short and worn pen point is difficult to pull out. Replace the pen point with a refill before it becomes too short to remove.

  • Page 66: Function Key

    When the CAPS LOCK indicator glows, the keyboard produces capitals when any letter is typed. Figure 4-12 CAPS LOCK indicator 1. CAPS LOCK indicator Product appearance depends on the model you purchased. CAPS LOCK This indicator glows green when letter keys are locked into their uppercase format.
  • Page 67 Some functions show the toast notification at the edges of the screen. Those toast notifications are enabled by default. You can disable them in the Function Key settings. To access it, click System Settings -> Function Key under TOSHIBA group in All apps. User's Manual...

  • Page 68: Windows Special Keys

    Windows special keys The keyboard provides two keys that have special functions in Windows, ® the Windows logo key activates the Start menu while the application key has the same function as the secondary (right) mouse button. This key activates the Windows Start menu. This key has the same function as the secondary (right) mouse button.

  • Page 69: Battery

    Hold down FN key and the keyboard will turn on the most recently used overlay function. Release FN key to return to normal keyboard operation. Temporarily changing modes If the computer is in Numeric Mode, you can switch temporarily to Arrow Mode by pressing a SHIFT key, while if it is in Arrow Mode, you can switch temporarily to Numeric Mode by also pressing a SHIFT key.

  • Page 70: Care And Use Of The Battery Pack

    You can change the Real-Time Clock settings in the BIOS setup utility. Refer to Troubleshooting for further information. Care and use of the battery pack This section provides the important safety precautions in order to handle your battery pack properly. Refer to the enclosed Instruction Manual for Safety and Comfort for detailed precautions and handling instructions.

  • Page 71: Monitoring Battery Pack Capacity

    Battery pack type Power off Power on With the second about 3.5 hours about 3.5 - 10 hours battery pack (36 Wh, 3 cell) Be aware that the charging time when the computer is on is affected by ambient temperature, the temperature of the computer and how you are using the computer.

  • Page 72: Maximizing Battery Operating Time

    When you use the tablet computer with the keyboard dock, the second battery pack is the first source to provide power. Wait several seconds to monitor the remaining operating time because the computer needs time to check the remaining capacity of the battery pack and then calculate the remaining operating time, based on this together with the current power consumption.

  • Page 73: Wireless Wan Device

    Battery pack type Sleep Mode Shut Down Mode With the second about 17 days about 95 days battery pack (36 Wh, 3 cell) Extending battery life To maximize the life of your battery pack, do the following at least once a month.

  • Page 74: Removing A Sim Card

    To pop the SIM card tray partially open, insert a slender object (about 10mm), such as a straightened paper clip, into the eject hole. Gently pull to open the SIM card tray. Never pull the SIM card tray completely out of the slot. Figure 4-14 Open the SIM card tray 1.

  • Page 75: Gps Function

    Near to high voltage cables Bad weather, such as heavy rain or snow TOSHIBA Keyboard Dock has built-in support for Ethernet LAN (10 megabits per second, 10BASE-T), Fast Ethernet LAN (100 megabits per second, 100BASE-TX) or Gigabit Ethernet LAN (1000 megabits per second,1000BASE-T).

  • Page 76: Lan Cable Types

    LAN cable types The computer must be configured properly before connecting to a LAN. Logging onto a LAN using the computer’s default settings might cause a malfunction in LAN operation. Check with your LAN administrator regarding set-up procedures. If you are using Gigabit Ethernet LAN (1000 megabits per second, 1000BASE-T), be sure to connect with a CAT5e cable or higher.

  • Page 77: Memory Media

    Plug the other end of the cable into a LAN hub connector or router. Check with your LAN administrator and hardware or software vendor before using or configuring a network connection. Memory media The computer is equipped with a memory media slot that can accommodate some kinds of memory media with various memory capacities so that you can easily transfer data from devices, such as digital cameras and Personal Digital Assistants.

  • Page 78: Media Care

    To format all areas of the memory card, including the protected area, you must obtain an appropriate application that applies the copy protection system. Media care Observe the following precautions when handling the card. Do not twist or bend cards. Do not expose cards to liquids or store in humid areas or lay media close to containers of liquid.

  • Page 79: External Display

    Press the memory media gently until it clicks into place. Figure 4-18 Inserting memory media 1. Memory media slot 2. Memory media Make sure that the memory media is oriented properly before you insert it. If you insert the media in wrong direction, you might not be able to remove it.

  • Page 80: Connecting An External Display

    Connecting an external display Your computer comes with a built-in display, but you can also connect other external displays via available ports on the computer. As the port operation of all external display devices have not been confirmed, some devices might not function properly. HDMI port and External RGB monitor port on the keyboard dock can not be connected for use at the same time.

  • Page 81: Hdmi Port

    HDMI port HDMI (High-Definition Multimedia Interface) port digitally transfers both video and audio data without reducing the quality. HDMI-compatible external display devices including televisions can be connected via the HDMI port. To connect an HDMI-compatible display device, do the following: As the port operation of all HDMI display devices have not been confirmed, some HDMI display devices might not function properly.
  • Page 82 The system is shutting down. When you connect a television or external monitor to the HDMI port, the display output device is set to HDMI. When you unplug the HDMI cable and replug it, wait at least 5 seconds before you replug the HDMI cable again. When you change the display output device, the playback device might not switch automatically.

  • Page 83: Wireless Display

    TOSHIBA Keyboard Dock HDMI Yes: Support Wireless display Your computer might support Wireless display, a wireless technology which utilizes Wi-Fi to allow the computer to be wirelessly connected to external displays including TVs as extended screens. With Wireless display, documents, streamed/local media contents or other online contents can be shared wirelessly with others.

  • Page 84: Security Lock

    Security lock A security lock enables you to anchor your computer to a desk or other heavy object in order to help prevent unauthorized removal or theft. The computer has a security lock slot on the keyboard dock into which you can attach one end of the security cable, while the other end attaches to a desk or similar object.

  • Page 85: Optional Toshiba Accessories

    Stylus Pen Stylus Pen can be purchased from your TOSHIBA dealer for use as spare items (spare pen tips and a tip draw-out tool are included). Not all the accessories are available in your region. Contact your reseller or TOSHIBA dealer for more information.
  • Page 86 Audio Enhancements To apply the sound effects for your current speaker, do the following. Right-click on the Speakers icon on the Windows taskbar, and then select Playback devices from the sub menu. Select Speakers, and click Properties. On the Enhancements tab, select the sound effects you would like, and click Apply.

  • Page 87: Video Mode

    High frequency definition for crisp details Consistent volume level across content To access the utility, click DTS Studio Sound in All apps. U.S. patents apply to this product. See http://patents.dts.com . Manufactured under license from DTS Licensing Limited. Video mode Video mode settings are configured via the Screen Resolution dialog.

  • Page 88: Chapter 5 Utilities And Advanced Usage

    To access this utility, click System Settings under TOSHIBA group in All apps. TOSHIBA Setup TOSHIBA Setup Utility is a BIOS setup utility that Utility provides you a menu-based user interface so that you can easily view and change BIOS settings.
  • Page 89 Depending on the usage situation, the life cycle of battery pack might not be extended properly. To access this utility, click eco Utility under TOSHIBA group in All apps. For details on TOSHIBA eco utility, see the help file. TOSHIBA Service This application allows your computer to...
  • Page 90 To access this utility, click PC Health Monitor under TOSHIBA group in All apps. This utility is only provided with some models. For details on TOSHIBA PC Health Monitor, see the help file. ® ® Bluetooth...
  • Page 91 To access it, click TruRecorder in All apps. For more detailed information, see the Help of this utility. TOSHIBA Audio TOSHIBA Audio Enhancement provides you the Enhancement function of audio source filtering, earphone audio enhancement, or speaker audio enhancement. To change the settings, click Audio Enhancement under TOSHIBA group in All apps.

  • Page 92: Special Features

    Windows Store applications are not included in the setup files above but can be downloaded from Windows Store. Special features The following features are either unique to TOSHIBA computers or are advanced features which make the computer more convenient to use. Access each function using the following procedures.
  • Page 93 This feature automatically turns power to the Panel power on/off computer off when the display panel is closed, and turns it back on when the display panel is opened. This can be specified in the Power Options. Low battery When battery power is exhausted to the point automatic Hibernation that computer operation cannot be continued, the system automatically enters Hibernation Mode...

  • Page 94: Toshiba Password Utility

    Passwords set by the TOSHIBA Password Utility function are different from the Windows password. User Password To start the utility, click Password Utility under TOSHIBA group in All apps, and click User Password. User authentication might be required to validate user rights when using TOSHIBA Password Utility to delete or change passwords, and so on.

  • Page 95: Supervisor Password

    Refer to the TOSHIBA Setup Utility section for further information. If you forget your HDD User Password, TOSHIBA will NOT be able to assist you, and your HDD will be rendered COMPLETELY and PERMANENTLY INOPERABLE. TOSHIBA will NOT be held...

  • Page 96: Toshiba System Settings

    To run TOSHIBA System Settings, click System Settings under TOSHIBA group in All apps. The TOSHIBA System Settings window contains a number of tabs to allow specific functions of the computer to be configured. In addition there are also three buttons: OK, Cancel and Apply.

  • Page 97: Toshiba Tablet Access Code Logon Utility

    Disclaimer TOSHIBA does not guarantee that the Tablet Access Code Logon Utility is completely secure or error-free at all times. TOSHIBA is not liable for any failure or damage that might arise out of your use of the Tablet Access Code Logon Utility, even if advised of the possibility thereof.

  • Page 98: Toshiba Pc Health Monitor

    You can disable the TOSHIBA PC Health Monitor at any time by uninstalling the software via Uninstall a program in the Control Panel.

  • Page 99: Toshiba Setup Utility

    Follow the instructions displayed on-screen in the message. TOSHIBA Setup Utility TOSHIBA Setup Utility is a BIOS setup utility that provides you a menu- based user interface so that you can easily view and change BIOS settings.
  • Page 100 Button Function Volume up Up arrow key Select the previous item Volume down Down arrow key Select the next item User's Manual 5-13...

  • Page 101: Troubleshooting

    In reality many problems can be solved simply, but a few might require help from TOSHIBA Support. If you find you need to consult others, be prepared to describe the problem in as much detail as possible.

  • Page 102: Analyzing The Problem

    Always try to make detailed notes of your observations and keep them in a permanent error log - this helps you to describe your problems to TOSHIBA Support. In addition, if a problem recurs, the log you have made helps to identify the problem faster.

  • Page 103: If Something Goes Wrong

    Before using a peripheral device or application software that is not an authorized TOSHIBA part or product, make sure that the device or software can be used with your computer. Use of incompatible devices might cause injury or might damage your computer.

  • Page 104: Hardware And System Checklist

    If you are using the AC adaptor, check that the wall outlet is working by plugging in another device, such as a lamp. Verify that the computer is on by looking at the Power indicator. If the indicator is glowing, the computer is on. Also, try turning the computer off and then on.

  • Page 105: Overheating Power Down

    If the computer has reached room temperature and it still does not start, or if it starts but shuts down quickly, contact TOSHIBA Support. AC power If you have trouble turning on the computer with the AC adaptor connected, check the status of the DC IN/Battery indicator.
  • Page 106 The lasting time of the Real-Time Clock (RTC) has and system date/ run out. You must set the date and time in the time are lost. TOSHIBA Setup Utility by using the following steps: Launch the BIOS setup utility. Refer to the...

  • Page 107: Internal Display Panel

    - if so remove it and try to start internal storage the computer again. If this has no effect, check the Boot Priority Options setting within the TOSHIBA System Settings. Memory Media Card For further information, refer to Operating Basics.

  • Page 108: Pointing Device

    If you are still unable to resolve the problem, contact TOSHIBA Support. Pointing device If you are using a USB mouse, you should also refer to both the mouse section and the documentation supplied with your mouse.
  • Page 109 Sound -> Mouse under Windows System in sensitive enough. All apps. If you are still unable to resolve the problem, contact TOSHIBA Support. USB mouse Problem Procedure On-screen pointer In this instance, the system might be busy. Try...

  • Page 110: Usb Device

    If you are still unable to resolve the problem, contact TOSHIBA Support. USB device In addition to the information in this section, also refer to the documentation supplied with your USB device.

  • Page 111: External Monitor

    Volume cannot be adjusted during Windows start up or shut down. If you are still unable to resolve the problem, contact TOSHIBA Support. External monitor Also refer to Operating Basics, and to the documentation supplied with your monitor for further information.
  • Page 112 Display error occurs Check that the cable connecting the external monitor to the computer is firmly attached. If you are still unable to resolve the problem, contact TOSHIBA Support. Problem Procedure Cannot access LAN Check for a firm cable connection between the LAN jack and the LAN hub.

  • Page 113: Wireless Lan

    Bluetooth device is turned Check to ensure that no optional Bluetooth Adaptor is installed in the computer. The built-in Bluetooth hardware cannot operate simultaneously with another Bluetooth controller. If you are still unable to resolve the problem, contact TOSHIBA Support. User's Manual 6-13...

  • Page 114: Toshiba Support

    TOSHIBA support If you require any additional help using your computer or if you are having problems operating the computer, you might need to contact TOSHIBA for additional technical assistance. Before you call Some problems you experience might be related to software or the operating system so it is important that you investigate other sources of assistance first.

  • Page 115: Appendix Specifications

    Chapter 7 Appendix Specifications This section summarizes the technical specifications of the computer. Physical Dimensions The following physical dimensions do not include parts that extend beyond the main body. The physical dimensions might vary depending on the model you purchased. Size Approximately 309.0 (w) x 215.2 (d) x 18.5/21.0 (h) millimeters (Z20t-B)

  • Page 116: Ac Power Cord And Connectors

    Computer 19 V DC External RGB monitor port pin assignment Signal Name Description Red Video Signal Green Video Signal Blue Video Signal Reserved Reserved Ground Ground Ground Ground Power Supply Ground Reserved Reserved Serial Data Signal HSYNC Horizontal Sync Signal VSYNC Vertical Sync Signal Serial Clock Signal...

  • Page 117: Certification Agencies

    Current rating: Minimum 2.5 amperes Certification agencies China: U.S. and Canada: UL listed and CSA certified No. 18 AWG, Type SVT or SPT-2 Australia: Japan: DENANHO Europe: Austria: Italy: Belgium: CEBEC The Netherlands: KEMA Denmark: DEMKO Norway: NEMKO Finland: FIMKO Sweden: SEMKO France:...

  • Page 118: Information For Wireless Devices

    Australia Europe AS approved Approved by the appropriate agency Canada China CSA approved CCC approved Information for Wireless Devices Wireless Technology Interoperability The Wireless LAN is compatible with other LAN systems Direct Sequence Spread Spectrum (DSSS) /Orthogonal Frequency Division Multiplexing (OFDM) radio technology, and is compliant to: The IEEE 802.11 Standard on Wireless LANs (Revision a/b/g/n, b/g/n or Revision a/b/g/n/ac), as defined and approved by the Institute of...

  • Page 119: Wireless Devices And Your Health

    Because Wireless products operate within the guidelines found in radio frequency safety standards and recommendations, TOSHIBA believes Wireless products are safe for use by consumers. These standards and recommendations reflect the consensus of the scientific community and result from deliberations of panels and committees of scientists who continually review and interpret the extensive research literature.

  • Page 120: Card Specifications

    If this occurs, the outsider might illegally access your system, eavesdrop, or cause the loss or destruction of stored data. TOSHIBA is not liable for the loss of data due to eavesdropping or illegal access through the wireless LAN and the damage thereof. Card Specifications Compatibility IEEE 802.11 Standard for Wireless LANs...

  • Page 121: Bluetooth Wireless Technology

    Radio Frequency Band 5 GHz (5150-5850 MHz) (Revision a and n) Band 2.4 GHz (2400-2483.5 MHz) (Revision b/g and n) The range of the wireless signal is related to the transmit rate of the wireless communication. Communications at lower transmit range might travel larger distances.

  • Page 122: Radio Links

    Radio links You can easily establish links between two or more devices, with these links being maintained even if the devices are not within a line-of-sight of each other. Radio Regulatory Information The wireless device must be installed and used in strict accordance with the manufacturer’s instructions as described in the user documentation that comes with the product.
  • Page 123 Russian Limited e.i.r.p 100mW. Permitted to use Federation: only for indoor applications, closed industrial and warehouse areas, and on board aircraft. Permitted to use for local networks of aircraft crew service communications on board aircraft in area of the airport and at all stages of flight.
  • Page 124 check the current channel of operation. If operation is occurring outside of the allowable frequencies for outdoor use, as listed above, the user must contact the applicable national spectrum regulator to request a license for outdoor operation. Canada - Industry Canada (IC) This device complies with RSS-210 of the Industry Canada Rules.
  • Page 125 Canada limits for the general population; consult Safety Code 6, obtainable from Health Canada’s website www.hc-sc.gc.ca Taiwan Article 12 Without permission granted by the NCC, any company, enterprise, or user is not allowed to change frequency, enhance transmitting power or alter original characteristic as well as performance to an approved low power radio frequency devices.
  • Page 126 If this equipment causes RF interference to other radio stations, promptly change the frequency being used, change the location of use, or turn off the source of emissions. Contact an authorized TOSHIBA service provider if you have problems with interference caused by this product to Other Radio Stations.

  • Page 127: Device Authorization

    This equipment is approved to the radio standard by the countries/regions in the following table. If you use this equipment in the countries/regions which are not listed in the following table, contact TOSHIBA Support. As of July 2015 Austria Belgium...

  • Page 128: Information About Intel Amt

    Philippines Poland Portugal Romania Slovak Republic Slovenia Spain Sweden Switzerland Information about Intel AMT ® Your computer might support Intel Active Management Technology (AMT) depending on the model you purchased. Using built-in platform capabilities and popular third-party management and security applications, Intel AMT allows IT to better discover, heal, and protect their networked computing assets.
  • Page 129 Enter a new password. Password must comply with the following requirements concerning character types and length: Must be between 8 and 32 characters long. Must contain at least one number (“0”, “1-9”). Must contain a mix of lower-case (“a”, “b”, “z”, etc.) and upper-case (“A”, “B”, “Z”, etc.) letter.
  • Page 130 Disable items to be no longer changeable in BIOS setup utility. Consult with your system administrator about details. When using the AMT function, TOSHIBA Keyboard Dock is required. When using MEBx, TOSHIBA Keyboard Dock or an external USB keyboard is required.

  • Page 131: Legal Footnotes

    For optimum performance, use your computer product only under recommended conditions. Read additional restrictions in your product documentation. Contact TOSHIBA technical service and support, refer to TOSHIBA support section for more information.

  • Page 132: Battery Life

    Published battery life numbers are achieved on select models and configurations tested by TOSHIBA at the time of publication. Recharge time varies depending on usage. Battery might not charge while computer is consuming full power.

  • Page 133: Vcci Class B Information (Japan Only)

    Over a period of time, and depending on the usage of the computer, the brightness of the LCD screen will deteriorate. This is an intrinsic characteristic of LCD technology. Maximum brightness is only available when operating in AC power mode. Screen dims when the computer is operated on battery power and you might not be able to increase the brightness of the screen.
  • Page 134 The OpenSSL toolkit stays under a dual license, i.e. both the conditions of the OpenSSL License and the original SSLeay license apply to the toolkit. See below for the actual license texts. Actually both licenses are BSD-style Open Source licenses. In case of any license issues related to OpenSSL please contact openssl-core@openssl.org.
  • Page 135 (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ===================================================== This product includes cryptographic software written by Eric Young (eay@cryptsoft.com). This product includes software written by Tim Hudson (tjh@cryptsoft.com).

  • Page 136: Freetype License Issues

    If you include any Windows specific code (or a derivative thereof) from the apps directory (application code) you must include an acknowledgement: "This product includes software written by Tim Hudson (tjh@cryptsoft.com)" THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
  • Page 137 We dont promise that this software works. However, we will be interested in any kind of bug reports. (`as is` distribution) You can use this software for whatever you want, in parts or full form, without having to pay us. (`royalty-free` usage) You may not pretend that you wrote this software.
  • Page 138 -------------- THE FREETYPE PROJECT IS PROVIDED `AS IS` WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT WILL ANY OF THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY DAMAGES CAUSED BY THE USE OR THE INABILITY TO USE, OF THE FREETYPE PROJECT.
  • Page 139 -------------- There are two mailing lists related to FreeType: freetype@nongnu.org Discusses general use and applications of FreeType, as well as future and wanted additions to the library and distribution. If you are looking for support, start in this list if you haven`t found anything to help you in the documentation.

  • Page 140: Index

    Index AC adaptor Equipment checklist 2-1 additional 4-31 External monitor connecting 2-10 problems 6-11 DC IN 19V jack 3-6, 3-10 ASCII characters 4-15 Graphics Processing Unit 3-13 Battery extending life 4-19 monitoring capacity 4-17 save mode 5-5 HDMI Micro port 3-5 HDMI out port 3-9 Battery indicator 3-4, 3-14 Bluetooth 7-7...
  • Page 141 6-5 inserting 4-24 Power 6-5 removing 4-25 Real-Time Clock 6-6 Sound system 6-10 TOSHIBA support 6-14 Memory media slot 4-23 Touch Pad 6-8 USB device 6-10 Moving the computer 1-11 USB mouse 6-9 Password power on 5-5...
  • Page 142 Sound system problems 6-10 automatic power off 5-5 Touch Screen 4-3 USB device problems 6-10 Video mode 4-33 Video RAM 3-13 Web Camera (back) 3-6 Web Camera (front) 3-2 Wireless communication 7-5 User's Manual Index-3...

Table of Contents