Toshiba Z10t-A User Manual page 44

Eject button
DC IN 19V jack
LAN jack
External RGB monitor
port
HDMI port
Universal Serial Bus
(USB 2.0) port
User's Manual
Do not connect any cable other than a LAN cable to the LAN jack. It
could cause damage or malfunction.
Do not connect the LAN cable to a power supply. It could cause
damage or malfunction.
Begins the computer's disconnect sequence.
Once the eject button is pressed and the
computer cannot communicate with external
devices connected to the keyboard dock. Undock
and re-dock the computer to re-establish
communication.
The AC adaptor connects to this jack in order to
power the computer and charge its internal
batteries. Please note that you should only use
the model of AC adaptor supplied with the
computer at the time of purchase - using the
wrong AC adaptor can cause damage to the
computer.
This jack lets you connect to a LAN. The adaptor
has built-in support for Ethernet LAN (10
megabits per second, 10BASE-T), Fast Ethernet
LAN (100 megabits per second, 100BASE-TX)
and Gigabit Ethernet LAN (1000 megabits per
second, 1000BASE-T). Refer to
Basics, for details.
This port provides 15-pin, analog RGB port.
Please refer to the External RGB monitor port pin
assignment section for information on external
RGB monitor port pin assignment. This port
allows you to connect an external RGB monitor
to the computer.
HDMI port can connect with Type A connector
HDMI cable.
Please refer to the
details
One Universal Serial Bus port, which complies to
the USB 2.0 standard, is provided on the left side
of the keyboard dock.
Operating
The HDMI port section for
3-9