Personal Settings (Customer-Programmable Features) - Jeep 2010 Grand Cherokee Owner's Manual

178 UNDERSTANDING YOUR INSTRUMENT PANEL
1. Turn the ignition switch ON.
2. Press the MENU button until Personal Settings
(Customer-Programmable Features) menu is reached.
3. Press the SCROLL button until "Compass Variance" is
displayed in the EVIC.
4. Press and release the FUNCTION SELECT button to
change the variance number. Continue until desired
number is reached.
5. Press either MENU, SCROLL, or COMPASS/TEMP
button to set the value and exit.
Personal Settings (Customer-Programmable
Features)
Personal Settings allows the driver to set and recall
features when the transmission is in PARK.
Press and release the MENU button until "Personal
Settings" displays in the EVIC.
Use the SCROLL button to display one of the following
choices:
Language
When in this display, you may select one of three lan-
guages for all display nomenclature, including the trip
functions and the uconnect™ gps (if equipped). Press the
FUNCTION SELECT button while in this display to select
English, Espanol, or Francais. Then, as you continue, the
information will display in the selected language.
NOTE: The EVIC will not change the uconnect™ lan-
guage selection. Please refer to "Language Selection" in
the uconnect™ User Manual located on the DVD for
further details.
Auto Door Locks
When YES (Y) is selected, all of the doors will lock
automatically when the vehicle reaches a speed of
15 mph (24 km/h). To make your selection, press and
release the FUNCTION SELECT button until YES (Y) or
NO (N) appears.