Vehicle Loading; Certification Label - Jeep 2010 Grand Cherokee Owner's Manual

316 STARTING AND OPERATING
WARNING!
A fire may result if gasoline is pumped into a
portable container that is inside of a vehicle. You
could be burned. Always place gas containers on the
ground while filling.
Loose Fuel Filler Cap Message
If the vehicle diagnostic system determines that the fuel
filler cap is loose, improperly installed, or damaged, a
"CHECK GASCAP" message will be displayed in the
EVIC (Electronic Vehicle Information Center). Refer to
"Electronic Vehicle Information Center" in Section 4 of
this manual. Tighten the fuel filler cap until a "clicking"
sound is heard. This is an indication that the fuel filler
cap is properly tightened. Refer to "Onboard Diagnostic
System — OBDII" in Section 7 of this manual for more
information.
CAUTION!
Damage to the fuel system or emission control sys-
tem could result from using an improper fuel tank
filler cap (gas cap). A poorly fitting cap could let
impurities into the fuel system.

VEHICLE LOADING

Certification Label

As required by National Highway Traffic Safety Admin-
istration regulations, your vehicle has a certification label
affixed to the driver's side door or B-Pillar.
This label contains the month and year of manufacture,
Gross Vehicle Weight Rating (GVWR), Gross Axle Weight
Rating (GAWR) front and rear, and Vehicle Identification
Number (VIN). A Month-Day-Hour (MDH) number is