Placing A Call; Dialing Manually - GreatCall Jitterbug How-To Manual

Placing A Call

Dialing Manually:

You can dial a phone number directly from almost every screen on your Jitterbug.
1. Open your Jitterbug. You will hear a dial tone to indicate that there is service available. If service
is not available, there will be no dial tone and you will see "No Service" on the Outside Display.
2. Dial the full ten digit number using your keypad. You may be required to dial the number
"1" first before placing a call in some areas.
3. Press the button to place the call when you see "CALL?"
If you accidentally press a wrong button, press the
For your ease of use, there are three screens where you cannot dial a phone
number: (1) when typing a Text Message, (2) when entering a new name and
number into your Phone Book using your keypad and (3) when using Voice Dial.
34 Placing And Receiving Calls
button to back up and delete the last number.