Setting Your Samsung Wep 470 Premium Bluetooth Headset To Pairing Mode - GreatCall Jitterbug How-To Manual

Setting Your Samsung WEP 470 Premium Bluetooth Headset To Pairing
Mode
The first step in setting up any Bluetooth device is called "Pairing." This step is required
because there are no wires to link your Jitterbug to your Bluetooth device. "Pairing"
happens when your Jitterbug and your Bluetooth device agree to communicate with
one another. By "Pairing," your Jitterbug recognizes your Bluetooth device and the two
devices automatically accept communication from each other.
Be sure to turn on your Samsung WEP 470 Premium Bluetooth headset before entering
Pairing Mode. To turn on the device, simply move the switch on the side of the headset to
the "on"position - you will see the orange area disappear when the headset is on. When the
device is on, to begin pairing, press and hold the "Answer/End" button in the middle
of your Bluetooth headset for several seconds until the blue indicator light turns on and
stays lit after blinking. This indicates that your headset is now in Pairing Mode.
Bluetooth 117