Warning And Safety Instructions - Miele WS 5427 MC 13 Operating And Installation Instructions

Washer-extractor
Table of Contents

Advertisement

Read the operating instructions be-
fore using this machine for the first
time. They contain important infor-
mation about the safety, use and
maintenance of the machine. This
way you will avoid the risk of acci-
dents and damage to the machine.
Keep these operating instructions in
a safe place and ensure that new
users are familiar with the content.
Pass them on to any future owner of
the machine.
Correct usage
Only use the machine to wash
items which are specified by the
manufacturer to be machine-washable
on the wash-care label.
Any other applications may be danger-
ous. The manufacturer is not liable for
damage resulting from improper use or
operation.
This machine should not be oper-
ated by children. Supervise its use
by the elderly or infirm.
Technical safety
Before setting up the machine,
check it for any externally visible
damage. Do not install and use a dam-
aged machine.
Before connecting the machine,
ensure that the connection data on
the data plate (fusing, voltage and fre-
quency) match the mains electricity
supply. If in any doubt, consult a quali-
fied electrician.

Warning and safety instructions

The electrical safety of this appli-
ance can only be guaranteed when
continuity is complete between the ma-
chine and an effective earthing system
which complies with local and national
regulations. It is most important that this
basic safety requirement is regularly
tested by a qualified electrician.
The manufacturer cannot be held re-
sponsible for the consequences of an
inadequate earthing system (e.g. elec-
tric shock).
The machine is built in accordance
with current safety requirements.
Unauthorised repairs could result in un-
foreseen dangers for the user, for which
the manufacturer cannot accept re-
sponsibility. Repairs should only be un-
dertaken by a Miele approved
engineer.
Ensure current is not supplied to the
appliance while maintenance or repair
work is being carried out.
The machine is only completely
isolated from the electricity supply
when:
– it is switched off at the wall socket
and the plug is withdrawn, or
– it is switched off at the mains, or
– the mains fuse is withdrawn.
5

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents