Connection To Drainage; Machines With A Drain Pump; Drain Valve Version - Miele WS 5427 MC 13 Operating And Installation Instructions

Installation

Connection to drainage

Machines with a drain pump

The machine drains via a drain pump
with a max. delivery head of 1 metre.
The 1.5 metre long drain hose must not
be kinked as this would restrict drain-
age.
The hook in the end of the drain hose
can be turned or taken off if required.
The drain hose may be connected as
follows:
– Direct into a sink (drain pump version
LP).
Hook the hose over the edge of the
sink and secure . Make sure that the
water can flow away freely to avoid
flooding and to prevent water from
being sucked back into the machine.
– Connected securely to a plastic drain
pipe with a rubber seal. There is no
need to use a non-return valve.
– Directed securely into a standpipe,
(seal the hose into the pipe to avoid
flooding in case of the drainpipe be-
ing blocked).
– Directly into a floor drain (gully).
The drain hose can be extended to 5
metres.
The accessories required can be pur-
chased from the Miele Spare Parts
Dept.
For draining the water away with a de-
livery head over 1 metre (and up to a
max. of 1.8 metres) a 2
pump" can be connected. Contact your
Miele Dealer or the Professional Sales
Dept.
50
nd
"Duo-drain

Drain valve version

A motorised drain valve is used to drain
the machine. The DN 70 angle hose
provided enables the machine to be
drained via an on-site gully (with odour
trap).