1.2.4 Removeng BM Sensor
Base style: Horizontal / Vertical back-mount
1.
Remove
M3x6(ST) Screw.
*Attention at reassembly
The screw hole is different because o f
Position.
Fix the hole for projection on Projection
for fixation.
Projection
for fixation
*Attention at reassembly
Connect BM Sensor with CN109 of Board
Main. Do not make a mistake because
CN108 and CN109 are connectors of this
type.
Position M1
Position M2
M4x6 (ST)
PMU2200Ⅱ/2300ⅡSERIES Service Manual
Position M2
Screw hole
Projection
for fixation
CN109
-16-
Position M1
Position M2
Position M1
Screw hole
for M1
for M1
Hole for
projection