Disassembly And Installation; Disassemble The Lamp Of Fridge Chamber - Haier HB21FSSAA Service Manual

SERVICE MANUAL
Model: HB21FSSAA, HB21FG*
Chapter 3 Disassembly and Installation

3-1. Disassemble the lamp of fridge chamber

The fridge lamp is LED type with low energy consumption and long operation life. The replacement steps are as
follows:
(A ) Replace the top lamp panel of fridge chamber:
(1) Remove two fixing screws of top lamp cover.
(3) Disconnect the connecting terminal, then
remove the four fixing crews of lamp panel.
(B) Replace the back lamp of fridge chamber:
(1) Remove the top lamp cover firstly. then remove
the back lamp cover (back light cover is mounted
on the back by clip hook structure)
(3) During installation, carry out the operation in the reverse order
(2) Remove the top lamp cover.
(4) During installation, carry out the operation in
the reverse order
(2) Remove the lamp panels. There are two back
lamp panel. Each lamp panel is fixed by fixing
screw and clip hook structure.
Issue 2010-12
Rev.
Ref1012S008V0
10