Assemble The Handle; Defrosting System Disassembly And Inspection - Haier HB21FSSAA Service Manual

SERVICE MANUAL
Model: HB21FSSAA, HB21FG*

3-6. Assemble the handle

(1) Assemble the fridge door handle
Firstly, insert the handle connectors into the hole of fridge door (Fig. 1).
Then take out the fridge handle, align the hole of handle head to the connector, install the handle to
the connector. Use inner-hexagon to fix the side fixing screws on the handle head tightly (Fig. 2).
The handle can be dismantled by reverse steps.
(Fig. 1)
(2)Assemble the freezing door handle
Firstly, insert the handle connectors into the hole of freezing door (Fig. 3).
Then take out the freezing handle, align the hole of handle head to the connector, install the handle
to the connector. Use inner-hexagon to fix the side fixing screws on the handle head tightly (Fig. 4).
The handle can be dismantled by reverse steps.
(Fig. 3)

3-7. Defrosting system disassembly and inspection

STEP-1: After take out all drawers, lift the air passage of freezer; take down the cover of freezer air
passage. Please pay attention to not break the wire of fan motor, and then disconnect the fan
connector.
Issue 2010-12
Rev.
Ref1012S008V0
(Fig. 2)
(Fig. 4)
18